Connecting To Power - HP f550g Quick Start Manual

2.3 Connecting to Power

Use only the attached power connector for activating the camcorder
and charging the built-in battery.
1. Connect one end of power connector to USB/Power connector
port on the camcorder. USB port input: DC 5V / 1A.
2. Plug the other end of the car adapter to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
camcorder automatically turns on. Car charger input: DC 12 /
24V.
Note:
This camcorder shall be installed near the rear view mirror, at the center and top of
windshield for optimal viewing.
6