Realistic 120-1959 User Manual
Realistic 120-1959 User Manual

Realistic 120-1959 User Manual

60-watt stereo equalizer/booster

Advertisement

60-Watt Stereo Equalizer/Booster
(120-1959)
Your Realistic 60 Watt Stereo Equalizer/Booster adds increased dynamic
range and clean, high-volume sound reproduction to your auto-sound system.
But that is only part of what this unit can do.
you tailor your system's sound to your vehicle's acoustics and your
personal taste.
below) let you easily expand and control your auto-sound system.
7 Band Equalizer with - gives you control of the basic frequency ranges
slide Controls
Built-In Fader - lets you easily control the balance between
Two Types of inputs - let you use the equalizer/booster with a radio
CD input - lets you easily connect a portable CD player
Hi/Lo Output Power Meter - shows the output power being used by the left
Speaker Impedance Control- lets you adjust the booster for optimum

Features

And, the equalizer/booster's many other features (listed
of music. The slide controls provide an instant
visual representation of the shape you give the
sound.
front and rear speakers if you have a four
speaker system.
or tape player that has line outputs jacks or
that only has standard speaker outputs.
(or any other portable unit with a headphones
jack) to the equalizer/booster.
and right channels of your system.
set the meter range for high or low, depending
on your average listening level.
performance with 4- or 8-Ohm speakers.
Faxback Doc. # 46781
The 7 band equalizer lets
You can

Advertisement

Table of Contents
loading

Summary of Contents for Realistic 120-1959

  • Page 1 60-Watt Stereo Equalizer/Booster (120-1959) Your Realistic 60 Watt Stereo Equalizer/Booster adds increased dynamic range and clean, high-volume sound reproduction to your auto-sound system. But that is only part of what this unit can do. you tailor your system's sound to your vehicle's acoustics and your personal taste.
  • Page 2 60-Watt Stereo Equalizer/Booster (120-1959) Included with Your Equalizer/Booster Your equalizer/booster comes with the following items that are necessary for connection and mounting. dispose of the packing materials. Mounting Brackets and Hardware L-Bracket ... 1 M4 Machine Screw ... 4 M4 Flat Washers ... 4 M5 Flat Washer ...
  • Page 3 . . . we strongly urge you to have this unit installed by a professional auto sound installer. Choosing The Mounting Location We suggest that you connect the wiring and confirm that the equalizer/ booster operates properly with your system before you actually mount it in your vehicle.
  • Page 4 Note: You must reset the clock, digital tuner memories for the radio, and any other timer/memory devices when you reconnect the battery wire after wiring is complete. Connect the equalizer/booster's black (ground) wire to a nearby part of the vehicle's metal frame. Note: Many parts of modern vehicles are made of plastic or other materials that do not conduct electricity.
  • Page 5 If the existing auto sound component (radio or tape player) has RCA-type line output jacks: Connect the radio/tape player's line outputs to the equalizer/booster's LINE INPUT jacks using shielded cables with RCA-type plugs. left to left and right to right.) Disconnect the square, in line connectors in the equalizer/booster's output wiring harness.
  • Page 6 Attach the left and right mounting brackets to the sides of the equalizer/booster. Using the brackets as a guide, mark the locations for the mounting holes. Drill 3/16 inch holes in the marked locations, using care not to damage anything on the opposite side of the mounting surface. Remove the mounting brackets from the equalizer and attach them to the mounting surface using the supplied self tapping screws.
  • Page 7 60-Watt Stereo Equalizer/Booster (120-1959) Turning On The Equalizer/Booster Turn on your radio or tape player and set its volume to a low level. Press the equalizer/booster's POWER button so that the POWER indicator lights. Readjust your radio/tape player's volume control for a normal listening level.
  • Page 8 Turn the FADER control clockwise to emphasize the front speakers. counter-clockwise to emphasize the rear speakers. Using The Power Meter The POWER METER indicates the approximate amount of power that is being delivered from the equalizer/booster to the speakers. When the METER LEVEL button is out (low setting), use the marked power levels (0.1, 0.3, 1.2, 2.0) to determine the power levels.
  • Page 9 60-Watt Stereo Equalizer/Booster (120-1959) Maximum Output power: ... 30 watts per channel or 60 watts total Frequency Response: ... 15 - 30,000 Hz, at -3 dB Separation: ... 50 dB Input Level High Impedance: ... 550 mV Low Impedance: ... 2.7V Total Harmonic Distortion: ...

Table of Contents