Setting up the video Connecting your video through RF lead ... 2 Connecting your video through RCA lead... 3 To the TV via antenna cable (if you are not using a RCA cable) ... 4 Copying, Assembling ...5 Tuning to the TV ...6 What to do if you get picture interference when using RF lead ...
Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV. Plug a RCA cable into the "RCA” socket of the video and the AV socket on the TV if available.
If you are using a RCA cable, select the AV input on the TV to see the picture from the video. If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the video.
If you have connected your video through the RCA connection (diagram 2 on page 3), go to step 2. If you have connected it through RF cable (as shown in diagram 1 on page 2) Select a free channel on your TV and manual tune the channel until the blue screen as shown in step 2 appears.
Page 6
If the ‘CLOCK SET’ display is not already on the screen CLOCK SET press MENU. TIME - - : - - Choose ‘VCR SET UP’ by pressing PR- twice, then OK. DATE - -/- -/- - - - Choose ‘CLOCK SET’ then press OK. 0-9:SETUP(HOUR) :CORRECT MENU:END Once the ‘CLOCK SET’...
Page 7
These buttons are used on the following two pages. Press MENU. Choose ‘PR Preset’ by pressing PR- then OK. Choose ‘PR Align’ by pressing PR+ then OK. PROG TV/VCR PR ALIGN PR01 P-01 PR08 P-08 PR02 P-02 PR09 P-09 PR03 P-03...
Rewind or fast forward a cassette from stop, or picture search backwards or forwards if the video is playing a cassette. PLAYING cassettes Play Push the cassette smoothly and squarely into the cassette bay, with its windows pointing up. PROG PLAY Hi-Fi TV/VCR A.SEL EJECT SP/LP MENU PAL/SEC INDEX A.SEL...
Still There must be a cassette in the video. Still picture from playback. Each press of the button moves the picture on one frame. Press the play button to switch back to normal playback. After approximately five minutes on still, the cassette will automatically switch to normal playback. If the still picture is jumping, you can steady it by using the PR+ and PR- button.
OSD (On Screen Display) ON & OFF This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change it to OFF mode. When a function is changed at the front display or remote control the change will be displayed on the screen.
Normal timer recording HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) PR+/-:SELECT OK:CONFIRM MENU:END PROG TV/VCR TIMER PROGRAM (ONCE) EJECT START TIME --:-- END TIME --:-- SP/LP MENU START DATE --/-- TAPE SPEED...
If all the settings are correct, press OK to confirm. The on screen display will remind you to enter a cassette and turn the video off. Switch your video off by pressing the button. You can switch your video on again if you want to set the timer to record another programme. Remember to switch the video off when you have finished.
14:00 11/08 Remaining time and cassette length This display will only appear when there is a cassette in the video. Press MENU and choose ‘Tape Control’ by pressing PR+ and then OK PROG TV/VCR TAPE REMAIN TAPE CONTROL TAPE REMAIN E-180...
If your video is connected through RF, it will switch to stand-by when no station is received for more than five minutes. Language Select Press MENU. LANGUAGE SET Select „VCR SETUP“ by pressing PR- twice, then press OK. ENGLISH DEUTSCH Choose „LANGUAGE SET“ by pressing PR-, then press OK. ITALIANO ESPAÑOL...
Page 15
Index Aerial ... 2, 6 Protected cassette ... 23 Bilingual...13, 25 Remaining time ... 22 RF out ... 6-7 Cassette length ... 22 Channel ... 6-7, 9-11 SP (standard play) ... 17-19 Child lock ... 15 Stand-by ... Precautions CM Skip ... 15 Station ...6-7, 11 Condensation ...
VCR symbol appears on the display, you can only change channel by using the video remote control. If the TV/VCR button on the video remote control does not work, read the instruction book for the TV to find out about an audio video button.
Quick-start guide Please follow the guide from the beginning to the end. Before you connect the video equipment make sure all equipment is switched off at the plug. Stage 1. Connecting the video to your TV A Fit the batteries into the remote control. Make sure that the (+) and (-) marks on the batteries agree with the (+) and (-) 200-240V, 50/60Hz...