Table of Contents
Advertisement
Sleep Function
The Sleep Function will turn off your TV automatically after the user
programs the time interval from one (1) to ninety-nine (99) minutes.
1. Press and hold the SLEEP button. The
INDICATOR LIGHT will stay lit. Release
the SLEEP button.
2. Enter time in minutes using the
numerical key pad. Indicator light
will go off.
(Min: 1 minute/keypad entry
(Max: 99 minutes/keypad entry 9-9)
3. Leave remote aimed at television.
IMPORTANT: Sleep Feature will not
work unless remote is left aimed at
television.
To Turn Off The Sleep Timer:
1. Sleep timer program will be cancelled
and reset to zero by either of the
following:
Press and hold SLEEP button until
INDICATOR LIGHT blinks or press
ON•OFF button, turning TV OFF.
Menu Function
The Menu Function is used to make changes in the selected settings such
as setting color, channels, timer, etc. The MENU button invokes TV, DVD
and DBS•SAT Modes. Each menu will vary from brand to brand.
Entering the Menu Mode:
1. Push the device button on the remote
for the desired menu screen.
2. Push the Menu button. This allows you
to view the menu of the device chosen.
The menu should now be visible on
your television.
3. While in Menu Mode these buttons will
function as follows:
Navigation Left/Right buttons will
operate as cursor right and left.
Navigation UP/DOWN buttons will
operate as cursor up and down.
MENU button applies the highlighted
menu item.
SELECT button may also be used to
select the menu item, especially in
DVD.
Not all functions in competitive models
and brands of televisions may be fully
supported.
EXITING THE MENU MODE
Push the CLEAR key to return to
normal operation.
15
INDICATOR
LIGHT
...
0-1)
ON OFF
(BLINK)
TV
(BLINK)
DBS•SAT
DVD
Programming With Code Search
If your TV, VCR, DBS Satellite System, DVD Player, Cable Box or
Audio System does not respond after you have tried all the codes for
your brand, or if your brand is not listed, try searching for your code
by following the steps below.
1. Manually turn on the device you wish to
program.
2. Press and hold CODE SEARCH until the
INDICATOR LIGHT lights, then release
CODE SEARCH.
3. Press and release the device button for the
device you are programming. The
INDICATOR LIGHT will blink once,
then remain lit.
4. Press and release ON•OFF until your
device turns off.
Important: You may have to press
ON•OFF up to 200 times.
5. When your device turns off, press
ENTER, the INDICATOR LIGHT will
turn off.
Identifying Codes From Your Universal Remote
If you need to find the three-digit code for your TV, VCR, DBS
System, Cable Box or Audio System after your device is set-up
use this procedure.
1. Press and hold CODE SEARCH until the
INDICATOR LIGHT lights, then release
CODE SEARCH.
2. Press and release the device button for
the code you are retrieving. The
Indicator Light will blink once.
3. Press and release CODE SEARCH. The
INDICATOR LIGHT will turn off.
4. Starting with 0 on the keypad, press the
number buttons in order (0-9) until the
INDICATOR LIGHT blinks.
5. The number which causes the indicator
light to blink is the first digit of your
code.
6. Repeat step 4 until you have retrieved all
three numbers in the code.
INDICATOR
LIGHT
CODE
SEARCH
VCR
ON OFF
TV
(BLINK)
DVD
DBS•SAT
AUDIO
CABLE
ON OFF
ENTER
(OFF)
INDICATOR
LIGHT
CODE
SEARCH
VCR
ON OFF
TV
(BLINK)
DVD
DBS•SAT
CABLE
AUDIO
CODE
SEARCH
(OFF)
...
16
Hide quick links:
Advertisement
Table of Contents
