Page 1
10330 N. Meridian Street Indianapolis, IN 46290 Made in Indonesia Hecho en Indonesia RCR860 US IB 01 Trademark(s) ® Registered Marca(s) Registrada(s) RCR860 www.rca.com MULTI-BRAND USE Try me. Illuminates only the words above the controls you need for each component.
You can program your RCA brand universal remote to operate most models of most brands of infrared, remote-controlled components manufactured after 1990. (See the enclosed Code Lists for a complete list of brands.) This remote is unusually versatile...
The Double Off function transmits a sequence of POWER OFF commands to turn off all RCA components. This feature is specific to RCA products and does not work with other brands. To activate this feature, press the ON/OFF key twice within a two-second window.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM Programming Methods (continued) Code Entry, the illuminated component name blinks four times when the component key is released and turns off. This is an indication that a programming error has occurred. Repeat the Direct Code Entry (NAME BLINKS) process from step 3 and try the next code listed.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM 4. Repeat the Manual Code Search and Entry Method. Each time a code turns the component on or off, you have found a code that operates the remote and needs to be tested for maximum functionality. Continue through the code lists, cycling through the codes you have already tried, until you find one that offers maximum functionality.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM Using the Remote to Control Your Components Because this remote controls more than one component, you must first “tell” the remote which component you wish to operate. That means, if you wish to operate your TV, you must first press the TV key to put the remote in the TV Mode. The remote stays in the chosen mode until you change it.
Troubleshooting (continued) • You may have pressed an invalid key for the mode the remote is in. • If you’re trying to turn on an RCA, GE or PROSCAN component, press the component key instead of the ON·OFF key. • If you’re trying to change channels, try pressing the OK key after entering the channel number as this is a requirement of certain models and brands.
CONSEJO El control remoto universal para ocho componentes viene programado para manejar la mayoría de televisores, VCR, lectores de DVD y receptores de satélite RCA, GE y PROSCAN. Simplemente oprima la tecla correspondiente—tecla DVD para el Lector de DVD; tecla TV para un televisor; SAT·CBL para un receptor de satélite o aparato de cable, etc.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM 1. Encienda manualmente el componente que desea manejar con el control remoto. 2. Ubique los Códigos de Marcas en las Listas de Códigos. 3. Oprima y sostenga la tecla del componente que desea programar. El nombre del componente iluminado se enciende y permanece encendido.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM Para salir sin guardar en ningún punto de la Búsqueda CONSEJO Manual de Códigos, oprima y suelte la tecla CLEAR. 1. Encienda manualmente el componente que desea manejar con el control remoto. 2. Oprima y sostenga la tecla del componente que desea programar.
RCR860_NA_IB_REVA.qxp 3/13/06 3:29 PM 8. Una vez su componente se enciende, Ud. ha encontrado el código correcto. Guarde el nuevo código oprimiendo y soltando la tecla STOP. El nombre del componente iluminado se apagará. ¡Deberá oprimir la tecla STOP para guardar el código; de lo contrario, no se (LUZ guardará...
Resolución de Problemas • Quizás oprimió una tecla inválida para el modo en que se encuentra el control remoto. • Si está intentando encender un componente RCA, GE o PROSCAN, oprima la tecla del componente en lugar de la tecla ON·OFF.
Need help?
Do you have a question about the NAVILIGHT8 RCR860 and is the answer not in the manual?
Questions and answers