Secure Cryptographic Module; Installing The Module In The Transceiver - Kenwood NX-5800 Service Manual

Connection Procedure
Insert the crimp terminal into the Square plug supplied with the
KAP-2.
Black/White
4
lead
Square plug
5
(E59-0419-05)
Black lead
Insulating cover
(F29-0481-15)
2.3.4 SECURE CRYPTOGRAPHIC MODULE (KWD-AE30/KWD-AE31:Option)
2.3.4.1 SUPPLIED ACCESSORIES
Connecting cable
(X42-3330-XX) (G13-2179-XX)
Note:
Supplied accessories with * mark are not used for the NX-5800.
2.3.4.2

INSTALLING THE MODULE IN THE TRANSCEIVER

(1) Remove the cabinet, top packing and shielding plate of the
transceiver.
Fig.3-3
Cushion A *
Cushion B
(G13-2178-XX)
KAP-2 Cable (E37-1113-25) 6-pin Connector
Pin No.
1 2 3
4 5 6
Cushion C Cushion D *
(G1D-0006-XX) (G1D-0055-XX)
(2) Attach the cushion B and C to the module backside.
Note:
Refer to the figure for how to attach cushion B. If the re-
lease paper is reversed, it cannot be pulled out.
(3) Fold the release paper as indicated in the figure.
Color Name
1 Red HR2
2 Blue GND
3 Yellow OSP
4 Green ESP
5 Brown GND
6 Black HR1
Spacer *
(F3K-0004-XX)
Align and attach the
cushion to the side of the
Module.
(No.RA017<Rev.002>)1-13