Night Mode; Digital Out; Parental Control - RCA L26HD32D Owner's Manual

1
Press SETUP/TV MENU in the stop mode or No
Disc.
Press or to select
or ENTER.
2
Press or to select "Picture Mode", then press
or ENTER.
3
Press or to select your desired picture mode,
then press ENTER.
TV Screen : 16:9 :
Display : On
Auto
Picture Mode
Film
JPEG Interval
Video
Auto:
Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source.
Film:
Suitable for playback of film content pictures.
Video:
Suitable for playback of video content pictures.
4
Press SETUP/TV MENU to remove the menu
screen.
NOTE:
• Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".

Night Mode

Night Mode enables you to control the dynamic
range so as to achieve a suitable sound for your
equipment.
1
Press SETUP/TV MENU in the stop mode or No
Disc.
Press or to select
/ or ENTER.
2
Press or to select "Night Mode", then press
or ENTER.
3
Press or to select "On" or "Off", then press
ENTER.
On : Loud sounds such as explosions are toned
down slightly when played.
Off : The unit will play the disc as recorded.
Night Mode
Off
On

Digital Out

4
Press SETUP/TV MENU to remove the menu
screen.
51F0101A_eng.indd 33
Digital Out
option, then press /
You can select the digital output sound format
corresponding to your system connection.
1
Press SETUP/TV MENU in the stop mode or No
Disc.
Press
2
Press
or ENTER.
3
Press
then press ENTER.
Off:
PCM:
Bitstream: Disc audio bitstream data will be
4
Press SETUP/TV MENU to remove the menu
screen.
NOTE:
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
• Even if you select "Bitstream", MPEG audio will be
output in PCM format.

Parental control

option, then press
Some discs are specified not suitable for
children. Such discs can be limited not to play
back with the unit.
Password and setting:
1
Press SETUP/TV MENU in the stop mode or No
Disc.
Press
2
Press
ENTER.
"Enter Password" screen will appear.
3
Press "0000" using Number buttons (0-9). (This
is pre-setting password of this unit). Then press
ENTER.
•
or to select option, then press
/ or ENTER.
or to select "Digital Out", then press
or to select "Off", "PCM" or "Bitstream",
Night Mode : Off
Off
Digital Out
PCM
Bitstream
There is no sound output from
DIGITAL AUDIO OUT jack.
Change Dolby Digital to PCM for the
output. Select when connected to a 2
channel digital stereo amplifier.
output.
or to select option, then press
/ or ENTER.
or to select "Parental", then press
If you input a wrong number, press EXIT/
CANCEL.
or
33
3/5/08 5:06:06 PM