Table of Contents
Advertisement
The Installation Menu
The Installation menu is used for installing the projector.
Items
Image Flip
Installation Attitude Link to Image Flip/Right Side Up/Upside Down: Changes the cooling
High Altitude
*1
Mode
*2
V keystone
Notes
*1: When "High Altitude Mode" is set to "On," the speed of the fan increases, and the fan noise
becomes slightly louder.
*2: Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
*3: VPL-DX270/DX240/DW240 only.
Item descriptions
HV/H/V/Off: Flips the projected image horizontally or vertically
according to the installation method.
setting to suit to the installation attitude. When set to "Link to Image Flip,"
the cooling setting changes based on the setting of "Image Flip."
Continuing to use the wrong setting may affect component reliability.
On/Off: Set to "On" when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
*3
*2
Auto
/Manual
: The higher the value, the narrower the top of the
projected image. The lower the value, the narrower the bottom.
The Installation Menu
27
Hide quick links:
Advertisement
Table of Contents
