Download  Print this page

Navigating The Provider Mode Screens; Setup Screen - Philips BiPAP Pro Bi-Flex Provider Manual

Respironics series.
Hide thumbs

Advertisement

Navigating the Provider Mode Screens

To navigate these display screens:
Turn the wheel to toggle between options and settings on the screen. Press the wheel to choose an option or setting that is
highlighted. If you choose "Back" on any screen, it will take you back to the previous screen.
Note: Choosing "EXIT" from the Provider Screen will exit provider mode and the device will return to the Home Screen
in the patient mode.
Note: Provider mode will time out after 1 minute of inactivity. The device will then automatically exit the provider mode
and return to the Home Screen in the patient mode.
Provider Mode Screen Descriptions
The following sections will describe the options available under the 3 choices from the Provider Screen (Reminder, Setup, and Info).
Reminder Screen
From the Provider screen, highlight "Reminder" and press the wheel. The following Reminder screen will appear.
Back
Reminder off 30 90
180 270 365
Reminder Screen
• Reminder (
) - You can set a reminder on this screen that will let patients know when it is time to perform a certain
task, such as replacing the mask. You can select one of the following settings: Off (no reminder is set), or you can set the
device to display a reminder after 30, 90, 180, 270, or 365 days.
Note: Refer to your Encore software to set a specific patient reminder message.

Setup Screen

From the Provider screen, highlight "Setup" and press the wheel. The following Setup screen will appear.
Setup Screen
- 2 -

Advertisement

   Also See for Philips BiPAP Pro Bi-Flex

   Related Manuals for Philips BiPAP Pro Bi-Flex

Comments to this Manuals

Symbols: 0
Latest comments: