Honeywell NXS0003V35A2H1 Product Data page 3

Protection
Overvoltage protection
Undervoltage protection
Earth-fault protection
Input phase supervision
Motor phase supervision YES
Overcurrent protection
PRODUCT IDENTIFICATION CODE
NXS 0003 V3 5 A 2
911 Vdc
333 Vdc
In case of earth fault in motor
or motor cable, only the
frequency converter is
protected
YES
Trip limit 4.0*I
H
instantaneously
Fig. 1. Product Identification Code
Unit overtemp. protection YES
Motor overload protection YES
Motor stall protection
Motor underload prot.
Short-circuit protection
of +24 V and +10 V
reference voltages
H 1
Brake chopper
0 = No brake chopper
1 = Internal brake chopper
EMC emission level
H = Fulfils standard EN61800-3 [2004] Cat C2
T = Fulfils standard EN61800-3 for IT Networks
C = Fulfils standard EN61800-3 [2004] Cat C1
(exception : Radiated emissions of the IP21 units
meet only the requirements of C2)
Enclosure class
2 = IP21
5 = IP54
Control keypad
A = Standard (alpha-numeric)
G = Graphic display (for Chinese and Cyrillic letters)
Nominal mains voltage
2 = 230 (208-240) Vac
5 = 400 (380-500) Vac
6 = 690 (525-690) Vac
Input Phases
V3 = 3 Phase
Nominal current (low overload)
0003 = 3A etc.
Product range: NXS
3
NXS VARIABLE FREQUENCY DRIVES
(fan/pump blocked)
YES
YES (pump dry / belt broken
detection)
YES
EN0B-0620GE51 R1107