Table of Contents
Advertisement
Reference
G-LINK Cable not working
•
Check to make sure the wands are positioned correctly.
•
GUIDE Plus+ Gold System control of cable box is slower than direct control of the
box itself. Keep this in mind when changing channels.
Incorrect GUIDE Plus+ Gold System channel map
•
The guide may get out of sync with the cable provider. Use setup to change the
zip code to 99999. Turn the TV off for ten minutes. Use setup again to change the
zip code to the correct value. Be sure to select the correct lineup if asked.
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure
to occasionally dust the ventilation slots in the cabinet to help assure
adequate ventilation.
The TV's screen may be cleaned with a soft, lint-free cloth as
well. Take care not to scratch or mar the screen. If necessary,
you may use a cloth dampened with warm water.
Never use strong cleaning agents, such as ammonia-based
cleaners, or abrasive powder. These types of cleaners will
damage the TV.
While cleaning do not spray liquid directly on the screen, or allow
liquid to run down the screen and inside the TV. Also, avoid placing
drinks or vases with water on top of the TV. This could increase the
risk of fire or shock hazard or damage to the TV.
Caution: If fixed (non-moving) images
are left on the screen for long
periods, they may be permanently
imprinted on the picture tube (or
Projection TV picture tubes). Such
images include network logos, phone
numbers, and video games. This
damage is not covered by your
warranty. Extended viewing of
channels displaying these images
should be avoided.
55
Advertisement
Table of Contents
