Memorex MET1297 Instruction Manual

Memorex MET1297 Instruction Manual

Outdoor bluetooth speaker

Advertisement

MODEL NO. MET1297
OUTDOOR BLUETOOTH SPEAKER
INSTRUCTION MANUAL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT

Advertisement

Table of Contents
loading

Summary of Contents for Memorex MET1297

  • Page 1 MODEL NO. MET1297 OUTDOOR BLUETOOTH SPEAKER INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT...
  • Page 2: Warnings And Precautions

    Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is Do not mix old and new batteries. intended to alert the user to the presence of uninsulated Do not mix alkaline, standard (carbon-zinc), or “dangerous voltage”...
  • Page 3: Important Safety Instructions

    Important Safety Instructions 1. Read Instructions - All the safety and feature. If you are unable to insert the plug receptacles as this can result in a risk of fire or operating instruction should be read before the fully into the outlet, try reversing the plug. If electric shock.
  • Page 4: Location Of Controls

    LOCATION OF CONTROLS 1. Stereo Speaker 2. Charge Indicator 3. Pairing Indicator 4. Power Button 5. Pair Button 6. Play/Pause Button 7. Volume Down Button 8. Volume Up Button 9. AUX IN Jack 10. DC Power Input...
  • Page 5: Product Features

    PRODUCT FEATURES The MW546 is a Bluetooth portable stereo speaker with the following features: • Auxiliary input jack to play music from your iPod or digital audio player • Wireless playback of music from your cell phone via the Bluetooth connection •...
  • Page 6: Led Indicator Lights

    After prolonged use, the battery voltage may discharge and operation might become intermittent. When this happens, please recharge the internal battery. LOW BATTERY INDICATION When operating the unit on battery power, the Red charging LED will flash indicating that the battery is low, please connect the unit to USB power for charging.
  • Page 7: Pairing A Bluetooth Device

    PAIRING A BLUETOOTH DEVICE 1. Power on the unit by pressing the Power button. 2. Press and hold the Pair button to begin pairing. The Pairing indicator will begin flashing quickly. When pairing, remain within 3 feet of the unit. 3.
  • Page 8: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Symptom Possible Problem Solution The USB power adaptor (not included) is not Plug the USB power adaptor (not plugged into a wall outlet included) into a wall outlet and plug the USB cable (included) into the micro USB or the USB cable jack on the MW546 (included) is not plugged...

Table of Contents