Electrolux EXP09CKEWI User Manual page 17

Plug in the unit, then press the "on/
off" button (when turned on, the unit
will operate as the last setting before
shutdown�
To switch the unit off, press "on/off" button
again, then remove the plug�
Do NOT switch the unit off by removing
the plug�
Always switch the unit off by pressing the
"on/off" button and wait for few minutes
before removing the plug�
Cool mode
Press the "mode" button until the left side
of LCD screen displays "
Press the "fan speed" button to choose
the fan speed "Hi", "Med", "Low", and
"Auto"�
Press the " " and "
the temperature you want
High Medium
Dry mode
Press the "mode" button until the left side
of LCD screen displays "
At the same time, the "low" fan symbol
appears on the screen�
Note: In this mode, fan speed cannot be
selected�
Fan mode
Press the "mode" button until the left side
of LCD screen displays "
In this mode, you can select fan speed
"Hi", "Med", "Low" or "Auto" by pressing
the Fan speed button and referring to the
diagram�
"�
"button to choose
Low Auto
"�
"�
Note: In this mode, the air exhaust hose
does not need to be connected�
Heat mode(For Heat & Cool models only)
Press the "mode" button until the left side
of LCD screen displays "
Press the " " and "
the temperature you want� At the same
time, the "low" fan indicator lights�
Note: In this mode, fan speed cannot be
selected�
AUTO mode
Press the "mode" button until the upper
side of LCD screen displays " auto "�
Under AUTO mode, you can not select the
fan speed�
Press the " " and "
the temperature you want�
Sleep mode
When the unit is in Cool, Heat or auto
mode, you can press the "sleep" button
to make the unit run in Sleep mode� In this
mode, the fan speed will be set as "low"
automatically, which cannot be changed�
In Cool mode the selected temperature
will increase by 1 °C 30 minutes after
ENGLISH 17
"�
" button to choose
" button to choose