Removal Of B/Q-Module; Removal Of P-Module; Removal Of Lamp Unit - Panasonic PT-AX200U Service Manual
Hide thumbs
Also See for PT-AX200U:
- Service manual (75 pages) ,
- Operating instructions manual (54 pages) ,
- Brochure (31 pages)
Table of Contents
Advertisement
PT-AX200U / PT-AX200E
3. Unscrew the 2 screws and remove the K-P.C.Board block.
6.6.
Removal of B/Q-Module
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the lamp unit terminal.
3. Unscrew the 2 screws and release the 2 grounding
terminals.
4. Unscrew the 3 screws and remove the power block (B/Q-
Module and P-Module).
5. Unscrew the 1 screw and separate the B/Q-Module block
and P-Module block.
6. Unscrew the 2 screws.
7. While pressing to shut each hook of the 2 resinous stands,
remove the B/Q-Module.
6.7.
Removal of P-Module
1. Remove the P-Module according to the steps 1 through 5 in
the section 6.6. "Removal of B/Q Module".
2. Unscrew the 2 screws.
3. While pressing to shut each hook of the 2 resinous stands,
remove the P-Module.
6.8.
Removal of Lamp Unit
1. Turn the projector upside down.
2. Loosen the 2 screws until they idle and remove the lamp
unit cover.
Page 16
Hide quick links:
Advertisement
Table of Contents
