LG SK8Y Owner's Manual page 22

22 Connecting
LG Sound Sync with wired connection
1. Connect your LG TV to the unit by using an
optical cable.
2
2. Set up the sound output of TV to listen to the
sound through this unit:
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1 on the remote
control or 1 on the unit.
4. Select OPT/HDMI ARC function by using F on the
remote control or F on the unit until the function
is selected.
You can see "LGOPT" on the display window if
connecting normally between this unit and your
TV.
,
Note
Details of TV setting menu vary depending on
the models of your TV.
LG Sound Sync with wireless
connection
1. Turn on the unit by pressing 1 on the remote
2. Select LG TV function by using F on the remote
3. Set up LG Sound Sync (Wireless) on the TV. Refer
Optical cable
control or 1 on the unit.
control or F on the unit until the function is
selected.
to the TV' s instruction manual.
"PAIRED" appears on the display window for
about 3 seconds and then you can see "LG TV"
on the display window if connecting normally
between this unit and your TV.
,
Note
y If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will be
disconnected.
y If your TV and this unit are connected through
LG Sound Sync (Wireless), this unit will be
Network standby mode regardless of the
status of network connection when this unit
is turned off. Check dimmed white LED on the
unit.