Charging Status Monitor; Using The Charge Control Software "Charge Master; Battery Meter - Skyrc T6200 Instruction Manual

CHARGING STATUS MONITOR

CHARGING STATUS MONITOR
When the charger is working, the users could check the real time status of charging capacity,
cell voltage, charging time, external and internal temperature easily. What's more, it can also
display the voltage in a graphic which helps the user monitor the charging status all the time.
Please touch "GRAPH" to check charging/discharging curve.
LiPo 6S C6.0A / D2.0A P1
BAL CHARGE
VOL 25.0V :
CAPACITY: 40mAh
TIME 00 14 06 : : : E.TEMP 0 C :
CURRENT 2 0A : . I. TEMP 45 C :
BALANCE
GRAPH STOP
STATUS
Note: When charging Lithium batteries in balance mode, you could check the balance
status and internal resistance of battery pack.
LiPo 6S C6.0A / D2.0A P1
BAL CHARGE
CAPACITY: 40mAh VOL 25.06V :
TIME 00 02 00 : : : E.TEMP 0 C :
CURRENT 2 0A : . I. TEMP 36 C :
BALANCE
GRAPH STOP
STATUS
Inner resistance of battery pack inclusively all connectors and leads.
USING THE CHARGE CONTROL SOFTWARE
"CHARGE MASTER"
The free "Charge Master" software gives you unparalleled ability to operate the charger
through the computer. You can monitor pack voltage, cell voltage and other data during the
charging process, view charging data in real-time graphs. And you can initiate, control charging
and update firmware from "Charge Master".
In order to connect the charger to the computer and use the "Charge Master", you are required
to use a USB cable which is not included in this package. The cable must be terminated on
one end with "A" plug and the opposite end is terminated with "mini-B" plug which can connect
to the charger directly.
The "Charge Master" can be download from www.skyrc.com. For more details, please refer to
HELP file which can be found in "Charge Master" software.
14
LiPo 6S C6.0A / D2.0A P1
VOLTAGE CURVE
V
T
TIME . 00:14:06
ENTER
VOLTAGE: 25.0V
LiPo 6S C6.0A / D2.0A P1
BALANCE
CELL1 : 4 18V .
CELL2: 4.17V
CELL3: 4.18V
CELL4: 4.18V
CELL5: 4.17V
CELL6: 4.18V
BATT RES . 85MΩ
ENTER
CAPACITY: 1300mAh
T6200
BATTERY VOLT METER
The user can check lithium battery's total voltage, the highest voltage, the lowest voltage and
each cell's voltage; and can check Nickel and Pb battery's total voltage.
Touch start button or touch and hold "Volt Meter" for 3 seconds to enter voltage meter program.
LiPo 6S C6.0A / D2.0A P1
BATT TYPE OPERATION
Pb BAL CHARGE
LiPo
VOLT METER
Lilon
CHARGE
CELLS CAPACITY SETTING PRESET START
mAh
Concerning to Lithium battery, please connect the battery to the charger main battery lead to
battery socket and balance wires to balance socket.
LiPo 6S C6.0A / D2.0A P1
VOLT METER
CELL1 : 4 18V .
CELL2: 4.17V
CELL3: 4.18V
CELL4: 4.18V
CELL5: 4.17V
CELL6: 4.18V
MAX : 4 18V . MIN : 4.17V
ENTER
VOL: 25.06V D-V: 0.01V
Concerning to Nickel and Pb battery, you could connect it directly to the charger to check the
total voltage.
LiMH 6S C6.0A / D2.0A P4
VOLT METER
VOLTAGE: 9.60V
ENTER
T6200
BATTERY VOLT METER
VOLT METER
CELL1 : 4 18V .
CELL2: 4.17V
CELL3: 4.18V
CELL4: 4.18V
CELL5: 4.17V
CELL6: 4.18V
MAX : 4 18V . MIN : 4.17V
ENTER
VOL: 25.06V D-V: 0.01V
Power Supply
This diagram shows
the correct way to
connect your battery
to check the voltage.
Lithium
Battery
This diagram shows
Power Supply
the correct way to
connect your battery
to check the voltage.
NiMH/NiCd NiMH/NiCd
Battery Battery
15