RCA PHD42600 User Manual page 34

Rca plasma monitor user's guide
Hide thumbs Also See for PHD42600:
Table of Contents

Advertisement

Other Information
Non-Operating
Temperature
Relative humidity
Pressure
Vibration
Acoustics
(IHF A-weighted 1meter) 40dB Max.
Sound
Residual hum (at volume max)
Practical max. Audio output (at 10% THD max.)
1.0vp-p
1K Hz input
Sound distortion (at 250 mw 1K Hz)
Audio output (input at 1.4V
Reliability Requirement
The MTBF needs 20000hrs under operation 25±5_(half luminosity, motion picture)
Emission Requirement
The unit shall meet the EMI limits in all screen modes. For EMI testing, the unit must be failed
with the screen pattern consisting of scrolling capital "H" characters also the brightness contrast
will be adjusted to max. level.
FCC class B part 15
Power Management
Mode
H-sync
Normal
Pulse
Stand-by No pulse No pulse
Power
Pulse
saving
No pulse Pulse
This Plasma display is Energy star compliant when used with a computer equipped with
DPMS.
Note: The power indicator LED color is green in normal state, yellow in stand-by and
power saving state.
32
-5~45_
20~80%
700~1114hpa
X/Y/Z, 0.7G/30~50Hz(sweep), 15 minutes
)
P-P
V-sync
Video
Pulse
Active
No video
No pulse
blanked
Graphics contained within this publication are for representation only.
500_W Max.
5W +5W Max. / 4 ohm
1% Max.
_1.0 V
P-P
Power dissipation
Normal power
Power off
Less than 6 watts
Chapter 5

Advertisement

Table of Contents
loading

Table of Contents