Table of Contents
Advertisement
Using the Component Video jacks (Y, Pb, Pr)
Connect a component, such as a DVD player or digital cable box, to the monitor using the Y,
Pb, Pr jacks. Connect a component video cable to the Y, Pb, Pr jacks on the back of the
monitor and to the component video jacks (Y, Pb, Pr) on the component. Then connect the
COMPONENT1 AUDIO In (L and R) jacks on the monitor to the Audio Out jacks on the back
of the component using audio cables.
Using the DVI IN jack
Connect a component using DVI, such as an HD receiver, using the DVI IN jack. Connect one
end of the DVI cable (not supplied) to the DVI Out jack on the back on the component and
the other end to the DVI IN jack on the back of the monitor. Then connect the Audio In jacks
(L and R) next to the DVI IN jack on the monitor to the Audio Out jacks on the back of your
component.
Chapter 1
COMPONENT 1
Y
P
P
R
L
B
R
AV component
DVI IN
R
L
ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝
ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ˝
ˇ˝ ˇ ˝ ˇ˝ ˇ˝
ˇ˝ ˇ ˝ ˇ ˝ ˇ˝ ˇ˝
ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝
HD receiver (RCA Scenium ATSC21, for example)
Graphics contained within this publication are for representation only.
Connections and Setup
9
Advertisement
Table of Contents
