Audio Setting; System Information - Toshiba Bdx1250Ke Blu-Ray Disc Player Owner's Manual

Audio Setting

1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Audio Setting],
then press .
3. Select an option, press
Audio Output
Move cursor key to select menu option
then use "OK " key to select
4. Press to select a setup option and
/
press
5. Select the setting you wish to change
- Press to return to the previous
menu.
- Press
[Audio Output]
[Spdif]
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
{Re-encode} – Auto select signal type
Audio stream on disc.
{Off
[HDMI]
Re-encode and Off.
{Bitstream
signal without any processing.
{PCM
with processing, only two channels
{Re-encode} – Auto select signal type
Audio stream on disc.
{Off
[Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
{96K} – For discs recorded at sampling
{192K} – For discs recorded at sampling
20
to access.
Audio Setting
PCM
Spdif
HDMI PCM
Down_samp 48K
Dolby DRC Auto
SETUP Exit
[Dolby DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{Off
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
The setting of Auto is effective for Dolby

System Information

1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [System
Information].
address will be displayed.
- Press to return to the previous
menu.
- Press
System Information
Software version: V XX
MAC: E8-9D-87-XX-XX-XX
Move cursor key to select menu option
then use "OK " key to select
SETUP Exit