Maintenance - Makita 3612BR Instruction Manual

Hide thumbs Also See for 3612BR:
Table of Contents

Advertisement

Trimmer guide (Accessory)
005060
Trimming, curved cuts in veneers for furniture and the
like can be done easily with the trimmer guide. The guide
roller rides the curve and assures a fine cut.
Install the trimmer guide on the guide holder with the
wing bolt (B). Insert the guide holder into the holes in the
tool base and tighten the wing bolt (A). To adjust the
distance between the bit and the trimmer guide, loosen
the wing bolt (B) and turn the fine adjusting screw (1.5
mm per turn). When adjusting the guide roller up or down,
loosen the wing bolt (C). After adjusting, tighten all the
wing bolts securely.
1
2
3
4
005061
When cutting, move the tool with the guide roller riding
the side of the workpiece.
3
003701
1. Guide holder
2. Fine adjusting
6
screw
3. Wing bolt (B)
4. Wing bolt (C)
5. Guide roller
6. Wing bolt (A)
5
1. Bit
1
2. Guide roller
3. Workpiece
2
Vacuum head set (Accessory)
005073
Use the vacuum head for dust extraction. Install the
vacuum head on the tool base using the two screws.
005074
Then connect a vacuum cleaner to the vacuum head.
005063
NOTE:
When the vacuum head is installed on the tool, the
max. plunge depth capacity will be reduced to 56
mm.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may
result.
7
1. Vacuum head
1
1. Vacuum head
2. Screws
1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents