Audio Processor; Sound Logic - RCA DVR2080 User Manual

Using the TV's Menu System
Main Menu Audio
0 Select a default for NTSC (analog) sources:
Go Back
Mono
1
Equalizer Presets
Stereo
2

Audio Processor

Audio Processor
3

Sound Logic

Select a default for sound expansion:
4
Audio Mode
Off
5
SAP
SRS
6
Balance
SRS TruSurround XT
7
Audio Connections
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Main Menu Audio
0
Go Back
Off
1
Equalizer Presets
On
2
Audio Processor
Turning Sound Logic on will monitor a program's audio
3
Sound Logic Sound Logic
track and limit volume excursions to a minimum and
maximum volume range from the current volume setting.
4
Audio Mode
Acting like a dynamic range limiter, it compresses the
dynamic range to limit sudden volume increases (for
5
SAP
example, the sudden increase in volume you sometimes hear
when a commercial starts).
6
Balance
7
Audio Connections
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to
select it. Press to return to the menu.
TruSurround XT, SRS and (
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
60
Audio Processor
The Audio Processor displays a choice list of available audio modes, which
control the way the sound comes through your speakers when TV is set to
using the Variable Output. The selected setting affects all inputs and tuners.
To create the settings:
SRS FOCUS
1. Press the MENU button to access the main menu.
2. Select Audio, and then Audio Processor. The following options appear:
Mono Plays the sound in monophonic audio only. This should only be
used when the stereo signal is weak. The channel banner displays the word
Mono when you have selected Mono and SRS is turned off.
Stereo Splits the incoming stereo audio signal into left and right front
channels. Most TV programs and recorded materials have stereo audio. The
channel banner displays the word Stereo when you have selected Stereo
and SRS is turned off.
The following options are available only if the Fixed/Variable Output is set to
Variable:
Off No SRS processing is applied to the audio.
Delivers a panoramic 3D sound stage from stereo material. Use the SRS
FOCUS adjustment on the right to adjust the clarity.
through any two-speaker playback system. Use the SRS Dialog Clarity
adjustment on the right to adjust the clarity.
Sound Logic
Acting like a dynamic range limiter, it compresses the dynamic range to limit
suggested volume increases (for example, the sudden increase in volume you
sometimes hear when a commercial starts). Choose On or Off, depending on
your preference.
) symbol are trademarks of SRS Labs, Inc.
Adds greater depth and stereo separation to stereo audio signals.
Creates a virtual surround sound from multichannel source material
Chapter 4