5
Pairing the mobile phone with the cradle
The phone must first be paired with the
cradle in order to use it for the first time.
The mobile phone must be switched on for
pairing, and must not be in Flight Profile. For
pairing, the mobile phone does not have to
be in the cradle, but it must be in the vehicle.
Note (valid for C-class vehicles, model
series W/S 204)
The mobile phone should always be inserted
in the cradle for pairing.
1.
Turn the key to position 1, 2 or 3 in the
ignition lock. (Please refer to the vehicle
Owner's Manual.)
4
5
M+P-03F-7639
®
2.
Press the Bluetooth
button (4) for
approximately 2 seconds.
The LED (5) flashes rapidly. The mobile
phone cradle switches to Discovery Mode
and can be recognised by the mobile phone.
3.
Select Menu
Settings
Connectivity
Bluetooth
On on the mobile phone.
(Please refer to the mobile phone operating
instructions.)
8
Connecting the mobile phone to the cradle
After pairing is complete, the connection
between the mobile phone cradle and the
mobile phone is established automatically.
The LED on the cradle lights up continuously.
In order for the hands-free system to func-
tion properly, the phone may not be connec-
®
ted with the Bluetooth
interface of
COMAND or the Audio System. Please refer
to the separate Operating Instructions of
COMAND or the Audio System.
Notes
If the mobile phone cradle and the mobile
phone are not connected automatically, the
connection can be established manually
(
9).
The mobile phone battery is charged when
the ignition key is in position 1, 2 or 3,
provided that the mobile phone is inserted in
the cradle.
Not every ring tone can be issued by
COMAND or the vehicle's operating system/
on-board computer.
While there is a connection between the
mobile phone and the cradle, the name of
the mobile service provider is displayed in
the operating system/on-board computer,
as long as there is sufficient reception.