Table of Contents
Advertisement
Chapter 4
Using the TV's Menu System
PIP Menu
Display Mode
Off No window is displayed.
PIP PIP window is displayed.
POP POP window is displayed.
PIP channel Allows you to choose the channel displayed in the PIP or main
POP window. Scroll through channel list as well as the VID1, VID2 and FRNT
input channels.
PIP size Allows you to choose the size of the PIP window: Small, Medium or
Large.
PIP position Allows you to choose where the PIP window appears on the
screen: Top right, Top left, Bottom right or Bottom left.
Note: Pip size and position are not available for POP.
Setup Menu
The Setup menu lets you configure the TV to fit its surroundings and your
preferences. To access the Setup menu, press MENU on the remote, and then
select Setup from the main menu.
Channel setup
Signal Type The TV chooses the signal type during the initial setup. If you
change how you receive broadcasts through the antenna input, you must
change the Signal type setting. Choose Cable if you are using cable or a
cable box for TV signals. Choose UHF/VHF Antenna if you are using an off-
air antenna for TV signals.
Auto channel search Searches for channels the signal is receiving. Go to
page 16 for more information.
Auto channel update Searches for any new channels that are not in your
channel list and adds them to the list.
List and labels Edit the channels in the list or choose labels for each
channel. Go to page 17 for more information.
Preferences
Language Displays a choice list that lets you select your preferred
language for the menus: English, Español or Français.
Maximum TV volume Allows you to set how high volume turns up when
you press the VOL+ button. Highlight Maximum volume, then press and
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
Graphics contained within this publication are for representation only.
Continues on next page...
37
Advertisement
Table of Contents
