Sony SCD-XA9000ES Service Manual page 6

SCD-XA9000ES
Note: Follow the disassembly procedure in the numerical order given.
D-POWER/POWER BOARDS AND RF BOARD SERVICE POSITION
– BOTTOM VIEW –
RF board
6
3 eight screws (3 × 8)
power board
3 four screws (3 × 8)
INSTALLATION TWO WIRES (FLAT TYPE) (25/35 CORE)
Note: When the wire (flat type) (35 core) is disconnected
from the RF board, then it is again connected,
disconnect the wire (flat type) (25 core) once,
and reconnect the wire (flat type) (35 core) first.
wire (flat type) (35 core)
wire (flat type) (25 core)
D-power board
2 Turn over the set.
4 two bottom plates