Digital Outputs - Siemens 9200 Features Manual

9200 Features Guide
String Description
PUS
Voltage Scale
PCS PCS
Current Scale
PPS PPS
Power Scale
PnS PnS
Neutral Scale
out1 out1
Output Mode Digital #1
tc1 tc1
Time Constant 1 (kT)
out2 out2
Output Mode Digital #2
tc2 tc2
Time Constant 2 (kT)
otIr otIr
Output Mode, Irda
tcIr
Time Constant Irda (kT)
dS r c
Display Scroll Time
dUPd dUPd
Display Refresh Period
PSEt
Password
Programmable Meter Language (PML) Protocol
* For the correct operation of a meter with the Megawatt option, PTS must be set to
"x1000."
** ION compatible protocol for use with an WinPM.Net system and other Access meters.

Digital Outputs

† The units displayed on the front panel are Wh, VAh, and VARh with the actual values of
MWh, MVAh, and MVARh respectively.
MWh Rec. and MVARh Rec. are represented by a lit "minus" (negative value) LED.
†† In Ext 1 or Ext 2 mode, the digital outputs are reserved for Feature Packs or digital
control. For digital output control information, refer to the 9200 Installation and Basic
Setup Instructions.
22
Range (Values)
0.001, 0.01, 0.1, 1, 10, 100, 1000
0.001, 0.01, 0.1, 1, 10, 100, 1000
0.001, 0.01, 0.1, 1, 10, 100, 1000
0.001, 0.01, 0.1, 1, 10, 100, 1000
(M)Wh Del., (M)VAh, (M)VARh Del.,
(M)Wh Rec., (M)VARh Rec. See note.
†† ††
Ext 1 , Ext 2
0.1 – 999.9
†††
(only 1 digit after the decimal pt.
permitted)
(M)Wh Del., (M)VAh, (M)VARh Del.,
(M)Wh Rec., (M)VARh Rec. See note.
†† ††
Ext 1 , Ext 2
0.1 – 999.9
†††
(only 1 digit after the decimal pt.
permitted)
(M)Wh Del., (M)VAh, (M)VARh Del.,
(M)Wh Rec., (M)VARh Rec. See note.
†† ††
Ext 1 , Ext 2
0.1 – 999.9
†††
(only 1 digit after the decimal pt. allowed)
0 – 30 seconds (0 = disable)
1 – 6 seconds
0 – 9999
Default
10
10
1
10
†
†
(M)Wh
1.0
†
†
(M)VARh
1.0
†
††
Ext 1
1.0
0
2
0