On-Timer - RCA 20F542T User Manual

To turn on the TV to a specific channel at a
specific time, use the On-Timer. Before you
begin, set the clock correctly. Details are on
page 19.
Press MENU to see the main menu.
CH+ or CH- to highlight Time.
Press OK to enter the Time submenu.
Press CH+ or CH- repeatedly to
highlight TV/CATV.
Press VOL+ or VOL- to select TV or
CATV, depending on whether you have
Cable TV service or not. Details are on
page 1.
Press CH+ or CH- repeatedly to
highlight Channel.
Press VOL+ or VOL- to enter the channel
number. This will be the channel to which
the TV turns on at the specified time.
Press CH+ or CH- repeatedly to
highlight On time.
Press VOL+ or VOL- to select Once (or
Daily, Off).
If you select Once, the timer will turn on
the TV one time within the next 4 hours
only.
If you select Daily, the timer will turn on
the TV at the same time and to the same
channel every day.
Choose Off to cancel the On-timer.
Press CH+ or CH- repeatedly to high-
light AM12:00 under the line of On Time.
Press VOL+ or VOL- to enter the On
time. Hold down VOL+ or VOL- to change
the time quickly in 10-minute increments;
press OK. The hour is highlighted. Use
the VOL+/- buttons to set the hour. This
will be the time at which the TV will turn
itself on.
Press MENU repeatedly to exit the
menu or the menu will automatically
disappear within a few seconds if no
buttons are pressed on the remote
control.

On-Timer

Main Menu
Picture
Sound
Preferences
Time
Setup
0
Main Menu
Picture
Sound
Preferences
Time
Setup
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 3
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 8
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM12:00
Channel 8
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM11:30
Channel 8
TV/CATV CATV
Clock AM10:00