Subscribe to Our Youtube Channel
Related Manuals for GRASS VALLEY LDK 8000
Summary of Contents for GRASS VALLEY LDK 8000
- Page 1 User’s Guide 3922 496 30571 November 2007 v3.0 LDK 8000 HDTV camera system Standard version WorldCam version SportCam version...
-
Page 2: Declaration Of Conformity
Declaration of Conformity FCC Class A Statement Copyright Trademarks Website We, Grass Valley Nederland B.V., Kapittelweg 10, 4827 HG Breda, The Netherlands, declare under our sole responsibility that this product is in compliance with the following standards: - EN60950 : Safety - EN55103-1: EMC (Emission) - EN55103-2: EMC (Immunity) following the provisions of:... -
Page 3: Table Of Contents
Viewfinder controls and indicators ........40 LDK 8000 HDTV camera system User’s Guide (v3.0) - Page 4 LDK 8000 WorldCam version........
- Page 5 Specifications for LDK 8000 ........
- Page 6 Dimensions ........... 107 LDK 8000 HDTV camera system User’s Guide (v3.0)
- Page 7 Valley at + 800 80 80 20 20 or +33 1 48 25 20 20 from most other countries. In the US and Canada please call 800-547-8949 or 530-478-4148. Ask to be connected to the EH&S Department. In addition, information concerning the program can be found at: www.thomsongrassvalley.com/environment LDK 8000 HDTV camera system User’s Guide (v3.0)
-
Page 8: Important Information
Warnings indicate danger that requires correct procedures or practices to prevent death or injury to personnel. • Cautions indicate procedures or practices that should be followed to prevent damage or destruction to equipment or property. LDK 8000 HDTV camera system User’s Guide (v3.0) - Page 9 For safety reasons the Base Station must be mounted in a 19-inch rack which has safety covers according to IEC65. When two Base Stations are mounted above each other, the minimum distance between them must be 50mm or the rack must be force-air cooled. LDK 8000 HDTV camera system User’s Guide (v3.0)
- Page 10 This separation can be achieved by using an isolation transformer between the local power outlet and the equipment connected to the camera. Alternatively, use equipment that has a double insulation and therefore does not require an earth connection. LDK 8000 HDTV camera system User’s Guide (v3.0)
- Page 11 (FPE) qualities as stated in the VDE regulation 0800/part2. A low impedance interconnection of both earth conductors must be provided at the central studio earthing point. LDK 8000 HDTV camera system User’s Guide (v3.0) Metal strap (PE) and video...
- Page 12 The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLACK. Ensure that your equipment is connected correctly - if you are in any doubt consult a qualified electrician. or coloured GREEN or GREEN LDK 8000 HDTV camera system User’s Guide (v3.0)
-
Page 13: Chapter 1 - Introduction
Chapter 1 Introduction 1.1 Technology The LDK 8000 is a high definition multi-standard, multi-format digital camera head using three 2/3-inch HD-DPM adapter for a flexible camera that is equally at home in the studio or out on location. The SportCam version can capture true progressive HD images, natively, in multiple formats and frame rates. -
Page 14: Film-Like Characteristics
S-curve of film. 1.1.4 Focus assist With HDTV, focusing is even more critical than before. The LDK 8000 has special patented focusing aids. A unique viewfinder zoom function enlarges the viewfinder image instantly with a simple press-button action, thus providing improved means for focusing. -
Page 15: Worldcam Version
The TriaxHD adapter is equipped with a rotary triax connector which provides freedom of movement during portable use of the camera and protects the connector from being damaged in near-floor conditions. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 1 - Introduction... -
Page 16: Superxpander
Digital contrast with standard black stretch and black press. • International standard 2/3-inch lens interface. • Optical servo-controlled four-position neutral density filter wheel. • Optical servo-controlled effect filter wheel with soft focus, four-point star and six-point star filters. LDK 8000 HDTV camera system User’s Guide (v3.0) - Page 17 Protected, easy-to-operate controls and switches with read-out of all settings. • Viewfinder status read-out of primary camera functions. • Clean scan feature allows capture of computer and other monitor pictures. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 1 - Introduction...
-
Page 18: Accessories
LDK 6517 LDK 4800 LDK 5302/60 LDK 5305/01 LDK 4021 LDK 5390/00 LDK 5390/10 LDK 6992/02 LDK 5021/05 LDK 5031/10 LDK 8111/37 LDK 8111/51 LDK 6985/21 LDK 5020/00 LDK 5020/01 LDK 5901/00 LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 19: Chapter 2 - Installation
Use a layer of shock-absorbing material around all sides of the unit to provide firm cushioning and prevent movement inside container. Seal shipping container securely. Mark shipping container FRAGILE to ensure careful handling. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 2 - Installation... -
Page 20: Transport Case
These inserts are used to support the rear of the camera. Make sure you use the correct foam insert for your particular configuration. documentation packing inserts top light tripod plate power supply additional supplies LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 21: Mounting A Lens
For more information about these adjustments refer to the lens manufacturer’s documentation. ☞ Note Always mount the dust protection cap when the lens is not connected to the camera. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 2 - Installation... -
Page 22: 2-Inch Viewfinder
To improve the comfort of the skin contact when using the viewfinder, fit the eye piece cover (3) to the rubber eyepiece. Spare eye piece covers (ordering number 3922 405 00461) are available at your Grass Valley representative. Figure 2-3. Viewfinder mounting LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 23: Positioning The Viewfinder
To use the viewfinder at a distance press the button (4) below or above the eyepiece tube and swing it free of the associated clip (5). The display can now be seen from further away. Figure 2-4. Viewfinder positioning LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 2 - Installation... -
Page 24: Viewfinder Accessories
(2). Do not forget to mount the microphone support bracket (3) at the end of the left eye adapter. Figure 2-6. Viewfinder left eye adapter LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 25: Mounting A Microphone
INSTALL menu. When a longer microphone is used, it is not necessary to place it in the split tube. Phantom power is always present on the front microphone socket. Figure 2-7. Microphone mounting LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 2 - Installation... -
Page 26: Tripod Adapter Plate
Press and hold the red locking lever (3) against the release handle (4). Ensure that you have a firm hold of the camera. Pull the release handle (4) forward. Move the camera backwards and up. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 27: Adjusting The Shoulder Pad
Adjust the shoulder pad when all units have been mounted to get the best balanced shoulder position. Figure 2-9. Shoulder pad LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 2 - Installation... -
Page 28: Attaching An Adapter
Lastly, tighten the vertical screw (5) in the handle of the camera. To detach an adapter from the camera head follow the steps for attaching it in the reverse order. Figure 2-10. Attaching an adapter LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 29: Chapter 3 - Configurations
Ethernet cable. Figure 3-1. Camera in TriaxHD mode Camera head + Triax adapter Teleprompter Tracker headphone LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 3 - Configurations External Power video in Cross over Ethernet cable Camera Base Station... -
Page 30: Multiple Triaxhd Cameras With C2Ip Network
Figure 3-2. Multiple HD cameras with C2IP network control Triax adapter Camera head Camera Base Station Base Station Camera Base Station Triax cable Ethernet cable MCP 400 LDK 8000 HDTV camera system User’s Guide (v3.0) Ethernet cable Hub or switch OCP 400 OCP 400 OCP 400... -
Page 31: Camera With Triaxhd Adapter And Superxpander
Base Station using a cross-over Ethernet cable. The Base Station is powered by a mains power supply. Figure 3-3. Camera with SuperXpander and TriaxHD adapter Camera head + Triax adapter + SuperXpander LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 3 - Configurations External Power... -
Page 32: Sportcam With High-Speed Base Station
High-speed HD Base Station Digital dual phase (2x SDI 1.5 Gb/s) RS 422 Playback Harddisk Controller recorder LDK 8000 HDTV camera system User’s Guide (v3.0) External Power video in Cross over Camera Base Station Ethernet cable Audio Video OCP 400... -
Page 33: Local Mode
An HD SDI camera signal output is not available. Figure 3-5. Camera in local mode Reference Camera head + Triax adapter RS232 connection DC power OCP 400 LDK 8000 HDTV camera system User’s Guide (v3.0) Video out Chapter 3 - Configurations... -
Page 34: Triax Cable Lengths
The maximum cable length for 8 mm Triax is adversely influenced by the power consumption of the camera. Maximum length 500 m (1,600 ft) 700 m (2,300 ft) 1,200 m (4,000 ft) LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 35: Chapter 4 - Location Of Controls
Chapter 4 - Location of controls Chapter 4 Location of controls 4.1 Camera head controls and connectors Figure 4-1. Camera connector location Viewfinder connector Lens connector VF/Mon RS232 connector connector Microphone connector LDK 8000 HDTV camera system User’s Guide (v3.0) - Page 36 St ar 4P ND 1/ 16 St ar 6P ND 1/ 64 cu s So ft Fo SW 2 Std. File LDK 8000 HDTV camera system User’s Guide (v3.0) Standard file button Black stretch switch Colour temperature switch Colour bars switch...
- Page 37 VRT star t shift Aud io Lev el Audio volume Exposure control time switch LDK 8000 HDTV camera system User’s Guide (v3.0) Cl ea r Cl ea r ND 1/ 4 St ar 4P ND 1/ 1 St ar 6P...
-
Page 38: Triaxhd Adapter Controls And Connectors
Mic 2 +48V HD-SDI (B)/VF HD-SDI (A) Power on 1.5A max. Script Light 11-17V Breaker LDK 8000 HDTV camera system User’s Guide (v3.0) Headset production vol. control selection Headset volume controls Call button Microphone phantom power switches Power on indicator... - Page 39 Power out connector Reference in / teleprompter out connector * These connectors only carry the VF SDI signal in the SportCam version. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 4 - Location of controls Front Prod Rear Ext1...
-
Page 40: Viewfinder Controls And Indicators
Tally Zebra Option Crisp Contr. Bright. Crispening Contrast control control Gain presets Top indicators MEDIA BATT ND/RE FOC+ AWFL Color temperature indicators LDK 8000 HDTV camera system User’s Guide (v3.0) switch Brightness control Iris indicator Cadre marker Safe area Non-standard... -
Page 41: Chapter 5 - Operating Instructions
Using the menu system to select functions. ☞ Note If you cannot access some camera functions or you wish to restrict access, refer to and Security” on page LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions position. “Access... -
Page 42: System Menu
Press the Select button again while this text is showing, the MAIN menu appears in the viewfinder. White Clean Bal. scan Select Menu Menu rotary select button control >> >> >> >> >> >> >> >> LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 43: Finding Your Way
Rotary control. Figure 5-3. Lens menu PREVIOUS Lens type Auto Iris Peak/Average Auto iris setp. Mom. iris setp. MENU: LENS Extended Iris LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions exec... -
Page 44: Leaving The System Menu
If you make changes to the video settings in the Systems menu and you decide not to keep them, use the Std. button at the side of the camera to recall a standard set of values for the video parameters. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 45: Assigning Functions To Buttons
Time Audio Level 5.3.3 Lens Location button button LDK 8000 HDTV camera system User’s Guide (v3.0) Control Possible assignments • Call • Switch to external video signal 1 • Switch to external video signal 2 • Extended Auto Iris Std. -
Page 46: Video Acquisition Modes
720p119 B: VF signal A: VF signal 720p50 B: VF signal A: VF signal 720p100 B: VF signal LDK 8000 HDTV camera system User’s Guide (v3.0) HDTV output SDTV output (base station) (base station) 1080i59.94 525i59.94 (NTSC) 1080i50 626i50 (PAL) 720p59.94... -
Page 47: Ldk 8000 Worldcam Version
1080p23.98 Hz 1080p24 Hz 1080p25 Hz 1080p29.97 Hz 720p59.94 Hz 720p50 Hz 720p23.98 Hz 720p25 Hz 720p29.97 Hz LDK 8000 HDTV camera system User’s Guide (v3.0) HD-SDI outputs VF menu (camera) setting A: 1080i59.94 1080i59 B: VF signal A: 1080i50... -
Page 48: Viewfinder Preferences
When the camera is on-air, the REC indicator in the viewfinder lights. When the studio ISO signal is received, the MEDIA indicator lights. Tally Zebra Option switch switch switch Tally Zebra Option Crisp Contr. Bright. Crispening Contrast Brightness control control control LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 49: Viewfinder Markers
When the viewfinder zoom function is in use, many of the viewfinder markers are switched off to improve the clarity of the display. The FOC+ indicator in the viewfinder flashes when the viewfinder zoom function is active. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions Gain presets... -
Page 50: Lens Preferences
When extended iris is on, the Non-standard indicator in the viewfinder lights, and gain and exposure controls are blocked. The parameters for the extended iris function are set in the LENS menu. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 51: Precision Focus
The Zoom indicator in the viewfinder shows the degree to which the lens has been zoomed out or in ranging from 0 (wide angle) to 99 (tele). It shows 50 if the lens does not support this feature. LDK 8000 HDTV camera system User’s Guide (v3.0) BAT T ND/RE... -
Page 52: Video Preferences
It also lights when black stretch or extended auto iris is on and if AWC, FL50 or FL60 is selected with the colour temperature selector. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 53: Test Signal
– The actual value of the gain in dB is assigned to these symbols in the INSTALL menu. – The Gain indicators in the viewfinder light to indicate the value selected. (The + and ++ indicators light when the gain is +++.) LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions Clear... -
Page 54: Optical Filter Selection
ND (Neutral Density) filter is selected. Gain is always -6 or -3dB is always 3, 6 or 9dB 6, 9 or 12dB is always 12 dB LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 55: Colour Temperature Selection
None of these indicators light when AWC is selected, but the Non-standard indicator lights. The viewfinder also displays the actual value of a measured colour temperature. The range of the auto-white balance is from 2500K to 20000K. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions... - Page 56 The following appears in the viewfinder: AWHITE: window SW 2 Std. File switch MED IA BAT T ND/RE FOC+ LDK 8000 HDTV camera system User’s Guide (v3.0) Exp. White Clean VTR start shift Time Bal. scan Select...
- Page 57 During the auto-white measurement process iris is set to Auto and 90% and the knee is turned off. Black balance is not necessary with this camera because of the continuous automatic black control circuits. LDK 8000 HDTV camera system User’s Guide (v3.0) MED IA BAT T ND/RE...
-
Page 58: Exposure Time
- for fast moving objects - for fast moving objects - for fast moving objects - shooting with 50Hz lighting (adjustable) - shooting with 60Hz lighting (adjustable) LDK 8000 HDTV camera system User’s Guide (v3.0) Shutter blade rotating stopped or rotating rotating... -
Page 59: Shooting Screens
When Clean Scan is on, the Non-standard indicator in the viewfinder lights. ☞ Note Do not shoot highlights in the Clean Scan mode as this may cause a smear effect. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions... -
Page 60: Reverse Scan
Press the Select button to start the measurement procedure (the iris is set to Auto). The process running message appears: ASKIN: running MED IA BAT T ND/RE FOC+ MED IA BAT T ND/RE FOC+ LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 61: Controls On The Triaxhd Adapter
When power is supplied via the Triax cable, an output power socket supplies +12 Vdc, 1.5A maximum for powering accessories. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions Intercom routing switch... -
Page 62: Selecting Monitoring Signals
Ext1 Ext2 the analog viewfinder signal (Y only), the external signal from the base station (SD-format, CVBS). or the scaled external signal from the base station (HD-format, Y only). LDK 8000 HDTV camera system User’s Guide (v3.0) Viewfinder display signal... -
Page 63: Using Audio
Channel 1 input socket selection switch Rear input level selection switch - channel 1 Ch. 2 input level selection switch Ch. 2 audio connector Ch. 2 phantom power LDK 8000 HDTV camera system User’s Guide (v3.0) Front Front Rear Rear Line Line Mic. - Page 64 The channel 2 rear input level switch selects either a line level input or a microphone level input for the channel 2 rear connector (Mic 2). The switch under the Mic 2 socket selects a phantom power supply (48V) for the rear socket. LDK 8000 HDTV camera system User’s Guide (v3.0)
-
Page 65: Intercom
A tracker can connect a headset to the side of the adapter to receive the intercom channels from the Base Station and the camera operator's microphone signal. The tracker's microphone signal is passed to the camera operator and to the Base Station. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions Front... -
Page 66: Communication
The tracker connector on the side of the adapter, as well as providing full intercom facilities for the dolly or crane driver, also carries a tally signal and a +12 Vdc power supply. This allows an external on-air lamp to be used. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 67: Managing Files
A standard operator's file can be recalled via the FILES menu. This file contains parameters for the set-up of the camera. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions... -
Page 68: Customer Standard Files
The disable camera function is a protection function which prevents unauthorised interference with the camera and provides an additional level of security. Setting disable camera to ON is similar to using User level 0 to protect the settings of the camera. LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 69: Access And Security
The recall and storage of a operator file is carried out via the Files menu of the menu system. An operator file contains information relating to the set-up of general camera preferences. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 5 - Operating instructions User's Card... -
Page 70: Access Control
Note Only use an original camera card. Store the owner’s card in a safe place. ☞ Note An LDK 8000 SportCam will only read LDK 8000 SportCam cards. C A M E R A C A R D LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 71: Chapter 6 - Menu Structure And Contents
Diagnostics menu - provides information on the current status of the camera. No values can be changed in this menu. Service menu - contains service item for advanced camera configuration. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents >>... -
Page 72: Vf Menu Structure
2 Ind. White 2 Ind. Black 2 Display Time 3 Menu Time 3 Rotary speed 0 Notch EXT 0 EXT AspectRatio VF Detail Level Zebra Zebra mode Level Zebra level (%) Zebra contrast LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 73: Lens Menu Structure
Handgrip Zoom Zoom speed Zoom curve Zoom/Focus Lens I/F Analog Lens I/F State NotOK LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents AutoIris Gain Gain Speed ExpTime Speed Min Iris Max Iris Min. Exp.Time 1/500 Max. -
Page 74: Video Menu Structure
3 Matrix Skin 2 Saturation S R>G .. B>G S Mat/Gam S White Limit S Master LDK 8000 HDTV camera system User’s Guide (v3.0) 2 Soft Detail 2 Level 3 Vert Detail 3 Coarse/Fine S Level S Level dep S Noise Slicer... -
Page 75: Install Menu Structure (Triax Version)
0 Timing > 0 Private Data 0 Buttons > 3 Fan operation > LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents 3 SideTone Level 1 Cam Mic Swt. 1 Cam Mic Gain 40dB... -
Page 76: File Menu Structure
1 Recall Oper.file > 2 Attributes > 2 FileSelect 2 Store exec 1 FileSelect 1 Recall exec 1 FileSelect 1 Store exec 1 FileSelect 1 Recall exec 2 FileSelect 2 Filename 2 Attribute LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 77: Security Menu Structure
Refer to the next chapter for the menu contents. 6.1.9 Service menu structure Refer to the next chapter for the menu contents. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents 0 Store Cust.Scene exec 0 Cust. -
Page 78: Menu Contents
Sets the zebra indication contrast. Turns the centre marker on or off. Turns Quality of Service bar on or off (only available when Wireless adapter is used). LDK 8000 HDTV camera system User’s Guide (v3.0) Level File Oper User 0... - Page 79 Notch EXT Off, On EXT AspectRatio 16:9, 4:3 LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Turns the iris indicator in the viewfinder on or off. This indicator shows the F - stop value of the iris opening of the lens.
-
Page 80: Lens Menu
Selects the zoom control speed. Selects the zoom reaction curve. Select an analog or digital lens interface. Displays the status of the lens interface (when a digital lens interface is used). LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 0 Oper... -
Page 81: Video Menu
0..99 (50) Color1 Red 0..99 (50) Color1 Blue 0..99 (50) LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description This electronic colour filter varies the colour balance to obtain warmer or colder effects for the auto-white memory positions. - Page 82 Sets the point where the knee gamma curve begins (when knee mode = Var). Selects the level above which the knee limiter is active. Turns knee desaturation on or off. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 3 Scene...
- Page 83 Mat/Gam G/M, M/G White limiter White limit Off, On LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Sets the desaturation level (when knee mode is Var and Desat is On) Sets the point where the knee gamma curve begins (when knee mode is Auto).
- Page 84 Sets the vertical parameter (red). Sets the vertical parameter (green). Sets the vertical parameter (blue). Turns image freeze on or off. Use to assist setup and configuration of the camera. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File Serv 1 Scene...
-
Page 85: Install Menu
Audio Gain Mode Loc, Ext Audio 1 Source Line, Mic, Mic48, Front LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Selects a video acquisition mode (available modes depend on your camera version). - Page 86 Select clean scan frequency. Selects display units for clean scan. Selects gain value for - preset. Selects gain value for + preset. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 1 Oper User 1...
- Page 87 VTR Start PROD, ENG , Zoom, EXT1, EXT2 VTR St. Control Mom., Alt. LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Selects gain value for ++ preset. Selects gain value for +++ preset.
- Page 88 120 min. or when temperature is too high. Turns the head fan on or off. Turns itself on after 120 min. or when temperature is too high. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 1 Oper...
-
Page 89: Files Menu
Filename <name> Attribute R/W, R LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Selects a standard, camera-stored or card- stored scenefile to be restored. Stores the current scene settings in the selected scenefile. -
Page 90: Security Menu
Fact = factory defaults; Cust = Customer file; Selects type of factory default file to use: Std = standard factory defaults; 8000 = LDK 8000 factory defaults. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 0 User 0... -
Page 91: Diagnostics Menu
DVP , SyncM, PPG, PPGsb, SeDa, LSP , RCB, PrePr, FSP , DaCam, FrDri, DacOu, FwDri, Front LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Displays base station connection status. Displays amount of C2IP control panels connected to the camera. - Page 92 Displays the system configuration. Displays the camera configuration. Displays the camera head hardware configuration. Displays the adapter configuration. Displays the base station configuration. LDK 8000 HDTV camera system User’s Guide (v3.0) Level File User 2 User 2 User 2 User 2...
-
Page 93: Service Menu
0..255 (128) Scaler Encoder Off, On Chroma Off, On LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 6 - Menu structure and contents Description Turns video test signal on or off. Selects test input. Selects test waveform type. Selects test waveform type. - Page 94 Chapter 6 - Menu structure and contents LDK 8000 HDTV camera system User’s Guide (v3.0)
-
Page 95: Chapter 7 - Connectors
Chapter 7 - Connectors Chapter 7 Connectors 7.1 Camera connectors Figure 7-1. Camera connector location Viewfinder connector Lens connector VF/Mon RS232 connector connector Microphone connector LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 96: Viewfinder Connector
TDMS Data 1+ TDMS Data 1 Shield TDMS Data 1- TDMS Data 0+ TDMS Data 0 shield TDMS Data 0- TDMS Clock+ LDK 8000 HDTV camera system User’s Guide (v3.0) vf video Pb vf ret Pr vf ret +batt +batt Pb vf... -
Page 97: Lens Connector
XLR 3-pole female; panel view Panel part number (X13): 5322 267 40523 7.1.5 RS232 serial connector Figure 7-5. RS232 serial connector SubD 9-pin male; panel view (X12) LDK 8000 HDTV camera system User’s Guide (v3.0) Ext. Video On/Off VTR Trigger Switch -batt Momentary Iris... -
Page 98: Connectors On The Triaxhd Adapter
+48V HD-SDI (B)/VF HD-SDI (A) Power on 1.5A max. Script Light 11-17V Breaker Script light Power in connector connector Auxiliary connector LDK 8000 HDTV camera system User’s Guide (v3.0) Microphone 1 connector Microphone 2 connector Intercom headphone connector Tracker connector... -
Page 99: Triax Connector
BNC connector: panel view (X106) 7.2.4 HD - SDI (A) connector Figure 7-9. HD - SDI (A) connector BNC connector: panel view (X105) LDK 8000 HDTV camera system User’s Guide (v3.0) Centre pin: Power and signals Inner shield: Return Outer shield: Camera housing GND Various types of triax connector are available. -
Page 100: Audio Microphone 1 Connector
2 of audio output. Microphone return Microphone Telephone return Telephone left Telephone right Microphone level: -64 dBu / -24 dBu switchable Microphone impedance: >600 Ohm Output level: +6 dBu nominal Output impedance: <50 Ohm LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 101: Dc Power Input Socket
Hirose 4-pole female: panel view (X110) 7.2.10 Script light power supply socket Figure 7-15. Script light power supply output connector Fischer 3-pole female: panel view (X111) LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 7 - Connectors Ground Ground (internally bridged to pin 1) +11.5 Vdc . -
Page 102: Teleprompter Output / Reference Input Connector
Tally control tracker (Cmos level, R out = 1k) +12V; I max. = 100mA +12V return Microphone level: -64dBu/-24dBu switchable Microphone impedance: >600 ohm Intercom output level: nom. 0 dBu , max +6 dBu Intercom output impedance: <200 ohm LDK 8000 HDTV camera system User’s Guide (v3.0) -
Page 103: Auxiliary Connector
7.2.13 Auxiliary connector Figure 7-18. Auxiliary connector Fischer 11-pole female; panel view Panel part number (X109): 3922 040 02512 LDK 8000 HDTV camera system User’s Guide (v3.0) +5VL Spare On-air n.c. Private Data Camera to Base Station Ground Private Data Base Station to Camera... - Page 104 Chapter 7 - Connectors LDK 8000 HDTV camera system User’s Guide (v3.0)
-
Page 105: Chapter 8 - Specifications
Registration Dynamic range Gain Colour matrices Colour temperature LDK 8000 HDTV camera system User’s Guide (v3.0) Chapter 8 - Specifications Value supplied via adapter or local power 60 W (camera head + TriaxHD adapter + viewfinder) -20 to +45°C (-4 to +113°F) -20 to +60°C (-4 to +140°F) - Page 106 0.6 Vpp HD tri-level reference signal 11-pins communication / signalling connector 11 pins private data XLR-3, balanced, +48V phantom XLR-5 with channels ENG/PROD/PROG 12V, XLR-4 male 12V, 0.25 A, 3-pin Fischer 12V, 1.5 A, 4-pin Hirose LDK 8000 HDTV camera system User’s Guide (v3.0)
- Page 107 Chapter 8 - Specifications 8.2.1 Dimensions Figure 8-1. Dimensions LDK 8000 HDTV camera system User’s Guide (v3.0)
- Page 108 Chapter 8 - Specifications LDK 8000 HDTV camera system User’s Guide (v3.0)
Need help?
Do you have a question about the LDK 8000 and is the answer not in the manual?
Questions and answers