Download  Print this page

Advertisement

This Getting Started Guide gives you an introduction
to the MP20/MP20Junior/MP30 monitors and helps
you get started with monitoring. Refer to the
Instructions for Use for full information and
instructions for the monitors, to ensure safe and
appropriate use.
Getting Started
IntelliVue MP20/MP20
MP30
The IntelliVue MP20/MP20Junior/MP30 (M8001A/
M8002A) patient monitor combines patient
surveillance and data management in a compact,
portable monitor. It has a 10-inch TFT LCD flat panel
SVGA display. The standard input devices for the
MP30 are the Touchscreen and integrated navigation
point; the MP20and MP20Junior are supplied with an
integrated navigation point only. Up to six waves can
be shown on MP20/MP30 Screens (USA - up to four
waves, MP20Junior - up to 3 waves). 12 ECG traces
can be shown on the 12-Lead ECG Screen.
The MP20/MP20Junior/MP30 can be connected to
one Multi-Measurement Server (MMS) and any one of
the measurement server extensions.
Junior
/
1

Advertisement

Table of Contents

   Summary of Contents for Philips IntelliVue MP20

  • Page 1 MP20/MP20Junior/MP30 monitors and helps MP30 you get started with monitoring. Refer to the Instructions for Use for full information and The IntelliVue MP20/MP20Junior/MP30 (M8001A/ instructions for the monitors, to ensure safe and M8002A) patient monitor combines patient appropriate use.
  • Page 2 Junior MP20/MP20 /MP30 Navigation Point Major Parts and Keys Part number and serial number Mounting quick-release lever Color-coded alarm lamps Alarms off lamp Model indicator ECG out...
  • Page 3 Junior MP20/MP20 /MP30 front panel MP20/MP20Junior/MP30 LED Colors and their Meanings Green when monitor is switched on On/Standby Red if there is a problem with the Error LED monitor Green, yellow, and red. Battery LED See the section on Using the Batteries for details 3 4 5 6 On/Standby switch...
  • Page 4 Related Products Related products extend the measurement capabilities of your monitor. None of the related devices have their own power on/standby switches. They take their power from the monitor, and switch on automatically when you turn on the monitor. A green power-on LED indicates when they are drawing power from the monitor.
  • Page 5 Measurement Server M3014A, M3015A and M3016A CO Extensions Extensions The M3014A Capnography Extension adds The optional measurement server extensions connect mainstream capnography, and optionally one pressure to the MMS and use the MMS settings and power. plus either a pressure or a temperature, Cardiac Output Trend data and measurement settings from the and Continuous Cardiac Output to the MMS.
  • Page 6 The configurability of the monitor means that often Operating and Navigating you can access the same element in different ways. For Everything you need to operate the monitor is example, you might be able to access an item through contained on its screen. Almost every element on the its on-screen setup menu, via a hard key, or via a screen is interactive.
  • Page 7 Using the Navigation Point Alarms Off/Pause Alarms - pauses alarm indicators. Exact behavior depends on Pause Alarms permanent key configuration Main Screen - closes all open menus and windows and return to the main screen. Back - takes you back one step to the previous menu.
  • Page 8 Using Keys The monitor has four different types of keys. - pauses alarm Pause Alarms indicators. Pause duration depends on Permanent Keys monitor configuration. If pause duration is infinite, this key is labeled Alarms A permanent key is a graphical key that remains on the screen all the time to give you fast access to functions.
  • Page 9 SmartKeys Operating Modes SmartKeys are configurable graphical keys, located at When you switch the monitor on, it starts up in the bottom of the main screen. They give you fast monitoring mode. To change to a different mode: access to functions. The selection of SmartKeys Select the menu.
  • Page 10 may see items, such as some menu options or the When the monitor is in Demonstration Mode, altitude setting, that are visible but ‘grayed out’ so Configuration Mode, or Service Mode, this is indicated that you can neither select nor change them. by a box with the mode name in the center of the These are for your information and can be Screen and in the bottom right-hand corner.
  • Page 11 Changing Measurement Switching a Measurement Settings On and Off Each measurement has a setup menu in which you can When a measurement is off, its waves and numerics are adjust all of its settings. You can enter a setup menu: removed from the monitor’s screen.
  • Page 12 Adjusting a Measurement Changing a Wave Speed Wave Lowering the wave speed compresses the wave and lets you view a longer time period. Increasing the speed • To quickly adjust wave-related measurement expands the waveform, giving you a more detailed settings (such as speed or size), select the view.
  • Page 13 Changing wave speed for a channel Changing Monitor Settings Enter the menu for a measurement by Wave • To change monitor settings such as date and time, selecting its wave. brightness, or QRS tone volume, select the Select Change Main Setup SmartKey and then select the Speed setting you want to change, or select User To set the speed to the wave group speed, select...
  • Page 14 Starting Monitoring Inspecting the Monitor Switching On • Press the on/off switch on the monitor for one Before you start to make measurements, carry out second. The monitor performs a self test and is the following checks on the monitor including all then ready to use.
  • Page 15 Setting up the Measurement Starting Monitoring Servers After you switch on the monitor, Decide which measurements you want to make. Admit your patient to the monitor. Connect the required Measurement Servers, or Check that the profile, alarm limits, alarm and QRS Measurement Server Extensions.
  • Page 16 Disconnecting from Power Networked Monitoring The On/Standby switch does not disconnect the If your monitor is connected to a network, a network monitor from the ac power source. To disconnect, symbol is displayed in the upper left corner next to the unplug the power cable.
  • Page 17 You can switch between battery-powered and mains- Using the Batteries powered (AC) operation without interrupting One OR two Philips M4605A rechargeable Lithium monitoring. Ion batteries must be inserted into the battery The batteries recharge automatically whenever the compartment at the rear of the monitor to use the monitor is connected to mains power.
  • Page 18 Battery LED Battery LED Colors When monitor on mains When monitor on battery power, power, this means this means battery power is > 90% Green batteries charging (battery power Yellow < 90%) less than 10 minutes power remaining Red, flashing battery malfunction battery malfunction Red, flashes intermittently...

This manual is also suitable for:

Intellivue mp20juniorIntellivue mp30

Comments to this Manuals

Symbols: 0
Latest comments: