How To Use The Remote Control To Complete The Initial Setup; Turn On The Tv; Complete The Initial Setup; Complete Auto Channel Search - RCA 1616362B User Manual

ON OFF
VCR1 TV
DVD VCR2 AUX SAT•CABLE
MUTE SKIP
SOUND GO BACK
GUIDE INFO
OK
SETUP
Go Back
Auto Ch. Search
. . .
Closed Caption . . .
Auto Tuning . . .
Language
English . . .
AUTO CHANNEL SEARCH
Go Back
Signal Type
Cable. . .
Start
Channel
Chapter 1
Graphics contained within this publication are for representation only.
How to Use the Remote Control to Complete
the Initial Setup
The technical term is "Navigation"– how you move through
the on-screen menus. The method is the same throughout
the menu screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the
remote to highlight one of the items listed on the screen. Use
the up or down arrow button to move up or down. Use the
right or left arrow button to move right or left.
To select the item that you've highlighted, press OK.
OK button
Note: Highlighted means that the menu item stands out from other
Arrows
menu items on the list (appears darker, brighter, or a different color).

Turn on the TV

Press TV on the remote, or press POWER on the TV's front
panel.
Note: Pressing the TV button not only turns on the TV, but puts the
remote into TV mode. "TV mode" means that the buttons on the
remote control operate the TV's functions.

Complete the Initial Setup

The menu system in your TV allows the TV's features to work
properly. The first time you turn on your TV, the SETUP screen
appears with Language highlighted. The default language is
English. To choose another language, press the right arrow.

Complete Auto Channel Search

This part of the setup allows the TV to search for all channels
viewable through your antenna or cable TV system. This is
sometimes called auto programming.
1. Highlight Auto Ch. Search and press OK.
2. The Signal Type option is set to Cable. To change the
option to Antenna, press the right arrow button and then
press OK.
3. Press the down arrow button to highlight Start. Press the
right arrow button to begin the auto channel search.
Connections & Setup
7