The HeartStart Trainer M5085A is designed to look like the HeartStart
HS1 Defibrillator. However, some of the defibrillator's physical features are
either inactive in the Trainer or behave differently from their counterparts
in the defibrillator, as noted below.
A TRAINING PADS CARTRIDGE HANDLE. Pull up on the handle to
turn on the Trainer. Remove the cartridge's hard cover, peel off the
resealable film cover, then lift out pads.
B ON LIGHT. The Trainer's green ON light is on solid when the Trainer
is on, and off otherwise. (In the HS1 Defibrillator, the green Ready light
blinks when the defibrillator is in standby mode, is on solid when the
defibrillator is in use, and is off when the defibrillator needs attention.)
C ON/OFF BUTTON. You can also turn on the Trainer by pressing this
green button. To turn off the Trainer, press the green button again and
hold it down for one (1) second.
D INFORMATION-BUTTON. This blue "i-button" flashes when it has
information you can access by pressing it. In the Trainer, the i-button
flashes when scenario selection is available and at the beginning of a
patient care pause when CPR coaching is available.