The Connection Of Controller And Digital Tube ...........................................................5 - Brother LT-5100 User Manual

LT-5100 PC Real-time Video Controller V7.6
4．3 The connection of controller and digital tube
Connection Description:
1． Each controller has 15 splitters, which are connected with the controller's ports by using
16PIN line, each splitter has two outlets, total 30 outlets;
2． The splitter outputs TTL signal, max 20m between splitter and the led lights;
3． Each splitter can run max 512 pixel dots. For example: If adopting 16 segment digital tube,
namely an output can control 32pcs of digital lamp tubes, but better control below 20
meters to reach a perfect effect.
The connection of multi-controllers
4．4
When a single controller is not enough to control the entire screen, Multiple controllers are
needed to work together, The connection is shown as in Figure 5. At the same time The
controllers shall be identified with number through the dip switch.
Figure 4
Page 5 of 22