Download Print this page

Operating Environment; Related Publications; Related Product Families - Lenovo Cisco Catalyst 3012 Product Manual

Gigabit ethernet switch module for bladecenter
Hide thumbs

Advertisement

Network cabling requirements
The network cables required for the switch module are as follows:
10BASE-T:
UTP Category 3, 4, 5 (100 meters (328 feet) maximum)
100-ohm STP (100 meters maximum)
100BASE-TX:
UTP Category 5 (100 meters maximum)
EIA/TIA-568 100-ohm STP (100 meters maximum)
1000BASE-T:
UTP Category 6
UTP Category 5e (100 meters maximum)
UTP Category 5 (100 meters maximum)
EIA/TIA-568B 100-ohm STP (100 meters maximum)

Operating environment

The environment must meet the following temperature and altitude requirements:
Temperature: 10° to 35°C (50° to 95°F)
Relative humidity: 8% to 80% non-condensing

Related publications

For more information, see the following product publications, which are available from:
http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5075938
Cisco Catalyst Switch Module 3110 and 3012 System Message Guide
Cisco Catalyst Switch Module 3110 and 3012 Software Configuration Guide
Cisco Catalyst Switch Module 3110G, 3110X, and 3012 Hardware Installation Guide
Cisco Catalyst Switch Module 3110G, 3110X, and 3012 Getting Started Guide
Cisco Catalyst Switch Module 3110 and 3012 Command Reference
Other documents:
IBM US Announcement Letter
http://ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS108-190
BladeCenter Interoperability Guide
http://lenovopress.com/bcig
BladeCenter Products and Technology, SG24-7523
http://lenovopress.com/sg247523

Related product families

Product families related to this document are the following:
1 Gb Embedded Connectivity
Blade Networking Modules
Cisco Catalyst Switch Module 3012 for BladeCenter (withdrawn product)
13

Advertisement

loading

  Also See for Lenovo Cisco Catalyst 3012

  Related Manuals for Lenovo Cisco Catalyst 3012