Philips SD-5.31SL Service Manual page 10

EN 10 4. SD-5.31SL
4.2.4 Verify setting
To check that the setting has change successfully.
1. Press button on the remote control while disc tray is open.
2. The texts will appear on the TV screen. That is how it looks
like.
– Copyright©
– Philips 2002-03
– SD5.31-34
– 30May2003
– 15:42
– 22200500
– A1133
– C3091
– 100305R3424
In the texts, the following numbers refer to:
• SD5.31-34 ==> refer to Application software version
• 30May2003 ==> refer to date software was upgraded
• 15:42 ==> refer to time software was upgraded
• 22200500 ==> refer to Slash version
• 100305R3424 ==> refer to servo software version
4.2.5 Test disc
The following test discs are recommended for use to test the
playability of the player.
• DVD disc: MPTD CVP 02.18- 12nc 7104 099 91691
• Audio disc (CDDA): Subchassis 8a Test disc- 12nc 7104
099 28362
4.2.6 Ejecting Disc
When ejecting disc is not possible using remote control
• Short circuit test land [F220] to ground when power
supplies are still present with assumption the front end is
not faulty.
• When above is not possible, ejecting of the disc has to be
done manually. Refer to instruction "Manually Ejecting of
disc".
4.2.7 ComPair
For assistance with the repair process of the Monoboard,
electronic fault finding guidance has been developed. This
program is called ComPair. This ComPair program is available
on CDROM. The version of the CDROM for repair of the
monoboard is V1.3 or higher and can be ordered with
codenumber 4822 727 21637. The procedure for registration is
explained in the help file of the program and in the CDROM
booklet. The cable to connect the Monoboard with a PC can be
ordered with codenumber: 3122 785 90017. All the hardware
and software requirements of the systems, necessary for
working with ComPair, are described on the CDROM
Mechanical Instructions