Tape Hints; Restoring Tape Tension And Sound Quality; Erasing A Cassette Tape; Erase-Protection Tabs - Rca Sct-530 Owner's Manual

TAPE HINTS

RESTORING TAPE TENSION AND SOUND
QUALITY
After you play a cassette tape several times, the tape might
become tightly wound on the reels. This can cause
playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from
the beginning to the end of one side, then completely
rewind it. Then loosen the tape reels by gently tapping
each side of the cassette' s outer shell on a flat surface.
Note: Be careful not to damage the cassette when tapping
it. Do not touch the exposed tape or allow any sharp
objects near the cassette.

ERASING A CASSETTE TAPE

If you no longer want a recording, you can record over it
or erase it.
To record over a cassette tape, simply record as usual. The
cassette deck records over the previous recording.
To erase all or part of a cassette tape, turn off your input
source. Then press
RECORD
tape, let the tape record to the end.
You can quickly erase both sides of a cassette tape using a
bulk tape eraser, available at your local Radio Shack store.

ERASE-PROTECTION TABS

Most cassette tapes have two erase-protection tabs - one
for each side of the tape. When a tab is in place, you can
erase or record on that tape side.
To protect your recordings from being accidentally erased
or recorded over, carefully break off the erase-protection
tabs, using a screwdriver or similar tool.
PRB1199A.En.01.09.DOC 9
. To erase the entire cassette
SIDE A TAB
If you later decide to erase or record over the tape, you
can place a piece of tape over the holes.
Note: When covering the holes, cover only the place that
was originally protected by the plastic tab.
9/2/99, 9:22 PM
9