Manually Setting Presets; From Tuner - RCA 004-000-00345-4 User Manual

Radio
EN Selecting Tuner Band
1. Press SOURCE to select TUNER.
2. Press BAND to select between AM or FM radio
band.
Tip: Your audio system has 32 preset stations.
Tuning to a Station
Press SKIP BACKWARD / SKIP FORWARD
select frequencies.
z
87.50 MH
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press TUNE•PRESET to toggle TUNE and PRESET
mode.
• Press SKIP BACKWARD or SKIP FORWARD
on the main system or PRESET UP or DOWN on
the remote control to access the previous or next
preset station. The display first shows the preset
program number and after a few seconds, the
frequency will be displayed. (FMPR:01 is FM
preset 1)
PR:01
8
Auto Preset Programming
(FM only)
Press and hold BAND button for 2 seconds to scan
stations in FM band. The stations will then be stored
as preset channels. A maximum of 32 stations can be
stored. Beware of your preset channels being erased
accidentally because the scanning and storing process
is automatic upon pressing the button. You can stop
the automatic scan by pressing any button, but the
to erased stations cannot be recovered.
AUTO

Manually Setting Presets

1. Press TUNE•PRESET button to enter TUNE mode.
2. Press SKIP BACKWARD / SKIP FORWARD
to access the desired frequency.
3. Press the PROG•SET button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP BACKWARD / SKIP FORWARD
to move to the desired preset number (1-32).
6. Press PROG•SET to store the selected frequency
at that preset.
Suppressing Stereo Signal
Press FM ST. to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
Tape Player
CD DISPLAY AUTO PROG BASS BOOST
DECK 1 DECK 2
PLAYBACK/ RECORD PLAYBACK
AUTOMATIC RECORD LEVEL • AUTO STOP MECHANISM CONTINUOUS PLAY 2 > 1
ONE TOUCH RECORDING TAPE DUBBING 2 > 1
Tape Player
RECORD
PLAY
REWIND
FAST FORWARD
STOP/EJECT
PAUSE
Playing a Tape
Tip: You can play a tape from either deck.
1. Press SOURCE repeatedly to select TAPE.
2. Press STOP/EJECT to open the cassette door.
3. Insert a tape into the door and push the door
closed.
4. Press REWIND/FAST FORWARD to position the
tape to the desired starting position. (Deck 1
Only)
5. Press PLAY to begin playback.
Continuous Play
1. Insert a tape into deck 2 and start playback.
2. Insert a tape into deck 1 and press PLAY and
PAUSE together.
3. When the tape in deck 2 finishes playback, PAUSE
at deck 1 will be released automatically and start
playback.
Recording

From Tuner

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select TUNER and
press BAND to access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
From CD
1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded.
5. Press RECORD to begin recording when CD
begins to play.
6. Press STOP to end recording.
Tape to Tape
1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press PAUSE and then RECORD on deck 1.
4. Press PLAY on deck 2. The playback and
recording start simultaneously.
EN
9