RCA SMALL WONDER EZ2050 series Quick Start Manual

v2.0 (1.0.2.0) (EN/F/E)
QuickStartGuide
EZ2050 Series RCA Small Wonder Camcorder
Congratulations on purchasing your new RCA Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
The User Manual PDF fi le can also be found in the CD ROM under the User Manuals folder.
1. Content of the box
• Small Wonder Camcorder • CD-ROM
• AAA batteries x 4 • Lanyard
• USB cable • Soft pouch
• AV cable • Quick Start Guide

2. Battery Installation

3
2
1
Push (to the right) to Observe the polarities.
unlock.
The camcorder can also be powered by USB. Refer to Connecting to a PC section in the User
Manual for connecting details. When the camcorder is connected to a PC, three options will be
displayed: USB connect, Web cam and USB power. Press + or - to select USB power and press
RECORD to confi rm.

3. General controls

English SD card slot
www.rcaaudiovideo.com
Camcorder strap hole
4. Inserting (or removing) memory card
4
An SD memory card (not included) is recommended for recording.
Slide up to lock.
Lift up the cover
Recording indicator
Microphone
On/off switch
Lens
AV output
LCD screen
USB
Play/pause
MODE
Setup menu
Delete recordings
Record
Switch between Photo
preview and Video
Audio speaker
preview modes
+/– Adjust volume
during playback;
zoom during record
Tripod screw hole
and preview
/ – Skip to
previous or next
recording; fast rewind
or forward
To insert card: Push the card in until a click is heard
To remove card: Push card in until a click is heard,
then slowly release the card. As card is under minimal
tension when locked in memory slot, please use care
when removing.

5. Turning on the camcorder

There are three basic modes for operating the camcorder:
Video preview mode, Photo preview mode and Playback
mode. It will always launch in video preview mode after
being switched on.
between modes.
Slide and
Video preview
hold until the
camcorder turns
on or off
Press PLAY/PAUSE
1 In Video preview mode, press RECORD to record a video
2 In Photo preview mode, press to record a photo
RECORD
6. Selecting recording quality
Settings Resolutions (pixel) &
Frame Rates (FPS)
HD 1280 x 720 @ 30fps
HQ 720 x 480 @ 30fps
WebQ 320 x 240 @ 30fps
1. In Video preview mode, press MENU to show the camcorder menu.
2. Press - or + to highlight Quality within the Video Menu
3. Press RECORD to select Quality which will then expose the choices of HD, HQ and WebQ.
4. Press - or + to highlight the desired Quality from HD, HQ or WebQ, then press REC to save
that setting.
5. Press MENU to exit the camcorder menu. The selected setting (HD, HQ or WebQ) appears on
the display screen during preview.
3 Actual recording time and capacity will vary depending on type of video content being recorded, system requirements,
and other factors.
Refer to the diagram below for switching
Switch on
Press MODE
Photo preview
1 mode 2
mode
Press MODE
To end Playback mode,
simply press RECORD
which will then return
the camcorder to Video
preview mode
Playback mode
Approx. recording durations
on a 32 GB memory card 3
4 hours
6 hours
17 hours