Timer Button - Mitsubishi Electric PLA-P1.6KA Technical & Service Manual

Remote controller
PLA-P1.6KA.UK, PLA-P2KA.UK, PLA-P2.5KA.UK
Operation buttons [ PAR-S27A-E ]

TIMER button

This switches between
continuous operation and
the timer operation.
OPERATION SWITCH
button
Press this button to
switch the cooler elec-
tronic dry (dehumidify)
automatic and heater
modes.
TEMP. ADJUSTMENT
button
This sets the room tempera-
ture The temperature setting
can be performed in 1°C
units
Setting range
Cooler 19°C to 30°C
Heater 17°C to 28°C
TIMER ADJUSTMENT button
This adjust the current time, start
time and stop time.
Once the controls are set, the same operation mode can
be repeated by simply pressing the ON/OFF button.
TIME SETTING button
This sets of switches the
current time. start time and
stop time.
LOUVER button
This switches the hori-
zontal fan motion ON
and OFF.
(This button does not
operate in this model)
CHECK-TEST RUN button
Only press this button to per-
form an inspection check or
test operation Do not use it
for normal operation.
VENTILATION button
This sets the ventilation fan
speed.
6
AIR SPEED button
This sets the fan speed.
ON/OFF button
This switches between the
operation and stop modes
each time it is pressed. The
lamp on this button lights dur-
ing operation.
AIR DIRECTION button
This adjusts the vertical angle
of the ventilation.
FILTER button
This resets the filter cleaning
indication display.