Cleaning The Print Head Using A Computer Utility - Epson XP-6000 User Manual

You see a screen like this:
5. Select Start to clean the print head.
The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is
finished. When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the scanner unit during a cleaning cycle or you may not
be able to print.
6. Select Check.
7. Select Print to print a nozzle check pattern and confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 3 times, wait at least 6 hours without
printing. Then run the nozzle check again and clean the print head again if necessary. If quality still does
not improve, contact Epson.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Related topics
Replacing Ink Cartridges and Maintenance Boxes

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.
Print Head Cleaning
233