Operation Instructions - Titan SF2841 Safety And Operating Manual

OPERATION INSTRUCTIONS

Note: Before using the tool, read the instruction
book carefully.
1. Before using your cordless circular saw
Your battery pack is UNCHARGED and you must
charge once before use.Your battery pack will
not be fully charged until you have performed
several charge and discharge operations by
charging & working with your saw. After this
your battery pack performance will improve.
Warning: The charger and battery pack are
specifically designed to work together so
do not attempt to use any other devices. Never
insert or allow metallic objects into your charger
or battery pack connections because an electrical
failure and hazard will occur.
2. How to charge your battery pack
Connect the battery charger to the power supply
and the green light (21) will illuminate
fully insert the battery pack into the charger to
make the connections and the red light (22)
will illuminate to show charging has started
. A discharged battery at normal ambient
temperature will take approximately 1 hour to
reach full charge. When charging is completed
the green light (21) will illuminate to indicate end
of charge (See fig2).
Note:
Green Light = power on
Red Light = charging
Battery Pack Inserted +Green Light =
Charging Completed
The battery pack can then be removed for use in
your saw. The charger timer circuit and battery
pack temperature safety cutout device prevents
overcharging of your battery pack.
Warning: After long usage the battery
will become hot, let the hot battery
cool down for 1 hour before recharging.
18V CIRCULAR SAW
SF2841 CSC18P-M-060425.indd 13
21
Fig 2
. Then,
20
22
SF2841
2006-5-25 11:08:47