Bike Holder - Silvercrest SCW 5 A2 User Manual And Service Information

Bike holder

You can use the bike holder to mount the water-resistant case on the bike frame or another
tube. To mount the bike holder, proceed as follows:

Open the holder by untightening the screws as far as necessary to be able to remove
the screw located on the side of the clip on the bottom piece.

Rotate the bottom piece aside.

Place the upper piece on a tube and replace the bottom piece.

Reinsert the screw into the bottom piece.

To fix the holder on the tube, tighten the screws.

Next you can fix the camcorder together with its water-resistant case and the swivel
holder on the bike holder. Please see the "Swivel holder" section on page 69.
SilverCrest SCW 5 A2
English - 71