Modem module for use with y-200 series electronic boiler sequencer & outdoor reset control system (7 pages)
Summary of Contents for Raypak 56K Modem Module Y-308
Page 1
Y-308 56K Modem Module For use with Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control System Installation and Operating Manual CATALOG NO. 5000.65A Effective: 09-19-08 Replaces: 08-26-05 P/N 241263 Rev. 2...
Introduction...1 Important Safety Instructions...1 Installation and Set-Up ...2 Limited Warranty...4 Y-308 Modem Module Introduction The Raypak Y-308 modem module provides a method to communicate with the Y-200 controller and auxiliary equipment. Communication speed is 56k. IMPORTANT SAFETY INSTRUCTIONS IMPORTANT NOTICE: These instructions are...
Y-308 Modem Module Installation and Set-up Note: A PCMCIA card might be necessary on some laptop computers for proper operation. Modem Board Installation 1. Remove power from the Y-200 control. Install the plug-in modem module (P/N 601741) on to connectors “J22” and “J23” as shown on the PCB.
Page 4
Installation and Operating Manual Dialing into the Y-200 Programming Keys and Operation 1. The “U” key takes you up through the screen displays and in the program mode changes the character above the cursor scrolling up. 2. The “D” key takes you down through the screen displays and in the program mode changes the character above the cursor scrolling down.
APPLICABLE WARRANTY PERIOD The effective date of warranty coverage is the date of original installation, of the Control System, by a qualified electrician or by a RAYPAK authorized service technician. The Applicable Warranty Period is one (1) year from the effective date.
Page 6
Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 Fax (805) 278-5468 Litho in U.S.A.