Advertisement
C-5 LATCHING
LOCKOUT MODULE
CSD-1 Compliant Local Manual Reset Device
The C-5 Latching Lockout Module (LLM) is a solid state electronic ignition fault detector that
has been engineered to comply with ASME Safety Code CSD-1 requirements for manual
intervention ignition supervision. The C-5 LLM monitors the boiler's electronic ignition system
and will lockout the ignition system upon flame failure. The boiler will remain safely shut-down
until manually reset by an on-site operator. The LLM prevents a boiler restart due to remote
cycling of the power. The LLM, or equivalent, is required on CSD-1 Code configured boilers.
Features
• Complies with ASME Safety Code CSD-1
• U.S. Postal Service AS-620 Compliant
• Microprocessor Based
• Solid State Circuitry
• Non-Volatile EEPROM Latching Mechanism
• Local Manual Reset
• 100% Shutoff Lockout
• 24V Monitor and Control Voltage
• Power and Fault LEDs
• Quick Connect Electrical Connections
• NEMA 3R Rainproof Enclosure
• Single Source Accountability
COVER OFF
COVER ON
Raypak, Inc. reserves the right to make product changes or improvements at any time without notification.
Catalog No. 5100.15C
Effective: 12-28-07
Replaces: 03-15-03
Advertisement
Table of Contents
Summary of Contents for Raypak Latching Lockout Module C-5
- Page 1 • Quick Connect Electrical Connections • NEMA 3R Rainproof Enclosure • Single Source Accountability COVER OFF COVER ON Raypak, Inc. reserves the right to make product changes or improvements at any time without notification. Catalog No. 5100.15C Effective: 12-28-07 Replaces: 03-15-03...
- Page 2 Sample Specification Section I: General Requirements 1. Provide a Raypak C-5 Latching Lockout Module (LLM) that shall provide electronic ignition supervision and, upon flame failure, shall require local manual intervention for fault reset. 2. The LLM shall be microprocessor based.
Need help?
Do you have a question about the Latching Lockout Module C-5 and is the answer not in the manual?
Questions and answers