RF 300 system planning
4.4 Installation guidelines
Effects of metal on different transponders and readers
Mounting different transponders on metal or flush-mounting
Not all transponders can be mounted directly on metal. For more information, please refer to
the descriptions of the individual transponders in the relevant sections.
The following section illustrates various possibilities for mounting, allowing for the effect of
metal on the particular transponder.
Transponders which can be mounted directly on metal
Any transponder whose operation is not affected by direct contact with metal can be mounted directly on metal.
Mounting of a transponder directly on
Flush-mounting of a transponder in
(a, b = required distance from metal)
System Manual, 05/2005, (4)J31069 D0166-U001-A1-7618, --