Download  Print this page

Reusing The Transport Unit - Siemens 3AK Operating Instructions Manual

Vacuum circuit-breaker module.
Hide thumbs

Advertisement

Transport, storage and packing
Fig. 5
Removing the tensioning belts
Transporting without pallet

Reusing the transport unit

8
Removing tensioning belts.
Remove accessory pack, if applicable, and store safely in the packaging for
later attachment.
Hang sling gear into the crane eyes.
Carefully lift vacuum circuit-breaker module.
Transport to installation site or leave suspended from crane for further work
steps.
Note
If necessary, keep accessory pack on hand for the installation.
Reusing the transport unit
To transport the vacuum circuit-breaker module again, the pallet with carton and
most of the components can be reused.
Do not reuse severed tensioning belts or plastic wrap.
Pack the vacuum circuit-breaker module in reverse order:
If the transport bracket was already removed, re-mount in reverse order (see
"Delivery state with transport bracket" on page 36). The transport bracket serves
to lock the withdrawable part in place in the cartridge insert during transport.
Attach the vacuum circuit-breaker module safely to the pallet using the appropri-
ate tools.
Cover with film and seal with adhesive tape.
Attach accessories pack.
Attach carton securely to the pallet floor.
Before returning to the factory, ask the responsible sales representative for a
returned goods number (see also "Service", on page 51).
When returning a vacuum circuit-breaker module, always indicate the type and
serial number (see "Rating plate" on page 27).
Fig. 6
Lifting the vacuum circuit-breaker module
9229 9923 176 0B
2013-09-09

Advertisement

This manual also for:

3ak1

Comments to this Manuals

Symbols: 0
Latest comments: