Download Print this page

Description Of Icons - Electrolux Premium Quick Reference Manual

Thermoregulator management controller
Hide thumbs

Advertisement

Description of Icons

ICON
FUNCTION
COMPRESSOR
ON when the compressor starts. Flashes when the activation
of the compressor is delayed by safety times.
FAN
ON when the fan starts.Flashes when the activation of the fan is
prevented due to external disabling or procedures in progress.
ON when the defrost is activated. Flashes when the activation of
DEFROST
the defrost is prevented due to external disabling or
procedures in progress.
Si accende all'attivazione dell'uscita ausiliaria selezionata come
AUX
AUX (LUCE)ON when the auxiliary output selected as
AUX (or LIGHT) is activated.
ALARM
ON following pre-activation of the delayed external digital input
alarm. Flashes in the event of alarms during normal operation
(e.g. high/low temperature) or in the event of alarms from an
immediate or delayed external digital input.
CLOCK
On in case of consultation history temperature .
DOOR
Blinking in case of door open/On in case of alarm door open
Service
Flashes in the event of malfunctions, for example E2PROM errors or
probe faults
HACCP
ON if the HACCP function is enabled.Flashes when there are new
HACCP alarms stored (HA and/or HF alarm shown on the display)
TEMPERATURE
ON in case of high Temperature
DISPLAY
ON in case Low temperature
From ser. no.:
Premium
DESCRIPTION
Page:3
NORMAL FUNCTIONING
ON
Compressor on
Fan on
Defrost in progress
AUX auxiliary output active AUX auxiliary output not
Delayed external alarm
(before the time 'A7' elapses)
History temperature
Auxiliary exit Light ON
Programming , set temperature No malfunction
HACCP function enabled
Alarm High temperature
Alarm low temperatutre in
history
Ed.1" 08-2014
Standard Control
OFF
Compressor off
Awaiting activation
Fan off
Awaiting activation
Defrost not in progress Awaiting activation
active
Alarms in norm. operation
No alarm present
(e.g. High/low temperature)
or immediate or delayed alarm
from external digital input
History temperature not
consulting
Auxiliary exit Light ON
Door open
Door closed
Malfunction (e.g. E2PROM error or
probe fault). Contact service
HACCP function not
HACCP alarm saved
enabled
(HA and/or HF)
No alarm
Actual alarm ( high temperature)
No alarm
Actual alarm ( low temperature)
560001 EG
Doc. No:
BLINK

Advertisement

loading

This manual is also suitable for:

Standard