1. Manuals
  2. Brands
  3. Ratoc Systems Manuals
  4. Media Converter
  5. U2SCXU
  6. User manual

Ratoc Systems U2SCXU User Manual

Usb2.0-ultra scsi converter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USB2.0-Ultra SCSI
Converter
U2SCXU
User's Guide
March 2003
Rev. 1.0

Advertisement

Table of Contents
loading

Related Manuals for Ratoc Systems U2SCXU

Summary of Contents for Ratoc Systems U2SCXU

  • Page 1 USB2.0-Ultra SCSI Converter U2SCXU User’s Guide March 2003 Rev. 1.0...

  • Page 2: Table Of Contents

    1-1.Package Confirmation ... 1 1-2.System Requirements and Restrictions ... 2 2.Installation ... 4 2-1.Connecting the U2SCXU to a SCSI device ... 4 2-2.Connecting the U2SCXU to a PC ... 6 2-3.Installing on Windows XP ... 7 2-3-1.Installing a RATOC original driver on Windows XP ... 8 2-3-2.Installing a Microsoft driver on Windows XP ...
  • Page 3 3.Utility ... 33 3-1.Using utility on Windows ... 34 3-1-1.U2SCXUTY.EXE Utility ... 34 A.Config Utility ... 36 B.Firmware update Utility ... 39 3-1-2.Disk formatting and Partitioning Utility ... 41 A.Format Utility on Windows Me/98SE ... 42 B.Disk Utility on Windows XP/2000 ... 45 3-2.Using utility on Mac ...
  • Page 4 4-11.A message saying [Scanning failed] appears when you removed the U2SCXU removable icon(RATOC U2SCX-USB2 SCSI Converter)(Win/Mac) ... 85 4-12.A message saying [The device “RATOC USB MassStorage Device WDM (withMPD) cannot be stopped because a program is still running”] appears when you try to remove the CBU2U removable icon(RATOC CB USB Enhanced Host Controller) (Win/Mac) ...

  • Page 6: Introduction

    Be sure to read the file as well. 1-1.Package Confirmation Check Package Contents:  •U2SCXU USB2.0-Ultra SCSI Converter  •U2SCXU CD-ROM  •User’s Guide  •Software Licence Agreement NOTE If any of these items are missing from the U2SCXU retail package, contact your supplier immediately.

  • Page 7: 1-2.System Requirements And Restrictions

    1-2.System Requirements and Restrictions •USB2.0 enabled PC running Windows XP/2000/Me/98SE If your PC doesn’t have the USB2.0 interface, the U2SCXU works as USB1.1 device. •USB enabled Apple PowerMac G4/G3, PowerBook G4/G3, iMac/iBook running Mac OS 9.2.1 or later/Mac OS X -10.1 or later.
  • Page 8 Mac running Mac OS 9.x. •Software/utility bundled with a SCSI device may not work. •You can’t use USB2.0 on Mac OS. The U2SCXU works as USB1.1 on Mac OS. •You may connect only one SCSI device and may not daisy-chain SCSI devices on Mac OS.

  • Page 9: Installation

    2.Installation This chapter explains how to connect a SCSI device to the U2SCXU. 2-1.Connecting the U2SCXU to a SCSI device Follow the steps through to connect your SCSI device to the U2SCXU: The fig.1 shows how to connect a terminator and the U2SCXU when you connect only one SCSI device.
  • Page 10 SCSI device. 3)Next, connect the U2SCXU to the first(or only) SCSI device. If you have a SCSI device with a Low-Density Centronics 50 pin or DB25 connector, use an adapter available from us.

  • Page 11: 2-2.Connecting The U2Scxu To A Pc

    1)If your PC is powered down, start it now. 2)Turn on the SCSI devices. 3)Connect the U2SCXU to an available USB port, as Fig.3 shows. A LED on the U2SCXU will come on. If the LED doesn’t come on, refer to Chapter 4-10. USB port 4)If you use a Windows XP user, proceed to Chapter 2-3.

  • Page 12: 2-3.Installing On Windows Xp

    2-3.Installing on Windows XP To install on Windows XP, follow the steps through: 1)Insert the bundled CD-ROM and right-click on [WNASPI32.INF] file at the [ASPI32] folder at the [U2SCX] folder, and then, select [Install] from the pull-down menu. 2)The next step is different as follows, depending on whether you have daisy- chained some SCSI devices or not: 2-1) If you have daisy-chained SCSI devices, or connected only one scanner,...

  • Page 13: 2-3-1.Installing A Ratoc Original Driver On Windows Xp

    2-3-1.Installing a RATOC original driver on Windows XP To install a RATOC original driver on Windows XP, follow the steps through: 1)The following wizard will appear. Make sure the [Install the software automatically(Recommended)] option is selected, and then insert the bundled CD-ROM.
  • Page 14 3)The following wizard will appear. Click [Finish]. 4)The following wizard will appear. Make sure the [Install the software automatically(Recommended)] option is selected, and then click [Finish].
  • Page 15 [SCSI and RAID controllers], and [RATOC USB MassStorage Device WDM(withMPD)] string without any “!” marks or “?” marks under the [Universal Serial Bus controllers], the installation has completed successfully. 8)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU.

  • Page 16: 2-3-2.Installing A Microsoft Driver On Windows Xp

    Storage Device] string without any “!” marks or “?” marks under the [Uni versal Serial Bus controllers], the installation has completed successfully. 8)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 17: 2-4.Installing On Windows Me

    2-4.Installing on Windows Me To install on Windows Me, follow the steps through: The procedure of the driver installation is different as follows, depending on whether you have daisy-chained some SCSI devices, or whether you have connected at least on MO drive: If you have daisy-chained SCSI devices, or connected only one scanner, proceed to Chapter 2-4-1 to install a RATOC original driver.

  • Page 18: 2-4-1.Installing A Ratoc Original Driver On Windows Me

    2-4-1.Installing a RATOC original driver on Windows Me To install a RATOC original driver on Windows Me, follow the steps through: 1)The following wizard will appear. Make sure the [Automatic search for a better driver(Recommended)] option is selected, and then insert the bundled CD-ROM.
  • Page 19 3)The following wizard will appear. Make sure the [Automatic search for a better driver(Recommended)] option is selected, and then click [Next]. 4)The following wizard will appear. Click [Finish].
  • Page 20 “?” marks under the [Universal Serial Bus controllers], the installation has completed successfully. 6)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 21: 2-4-2.Installing A Microsoft Driver On Windows Me

    “?” mark may appear with the [USB Mass Storage Device] string, but it doesn’t affect the performance of the U2SCX. 2)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 22: 2-4-3.Using Mo Drives On Windows Me

    3)If you agree to the terms and conditions, click [Yes]. 4)The following window will appear. Click [Finish]. 5)You are now ready to connect the U2SCXU to a PC. Proceed to Chapter 2-2 to connect the U2SCXU. 6)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes...

  • Page 23: 2-5.Installing On Windows 2000

    2-5.Installing on Windows 2000 To install on Windows 2000, follow the steps through: 1)Insert the bundled CD-ROM and right-click on [WNASPI32.INF] file at the [ASPI32] folder at the [U2SCX] folder, and then, select [Install] from the pull-down menu. 2)The next step is different as follows, depending on whether you have daisy- chained some SCSI devices or not: 2-1) If you have daisy-chained SCSI devices, or connected only one scanner,...

  • Page 24: 2-5-1.Installing A Ratoc Original Driver On Windows 2000

    2-5-1.Installing a RATOC original driver on Windows 2000 To install a RATOC original driver on Windows Me, follow the steps through: 1)The following wizard will appear. Insert the bundled CD-ROM, and then, click [Next]. 2)The following wizard will appear. Make sure the [Search for a suitable driver for my device(Recommended)] option is selected, and then click [Next].
  • Page 25 3)The following wizard will appear. Select the [CD-ROM drives] option, and then click [Next]. 4)The following wizard will appear. Make sure a [rsbulkm.inf] file is found, and then click [Next]. 5)The following wizard will appear. Click [Finish].
  • Page 26 6)The following wizard will appear. Click [Next]. 7)The following wizard will appear. Make sure the [Search for a suitable driver for my device(Recommended)] option is selected, and then click [Next]. 8)The following wizard will appear. Select the [CD-ROM drives] option, and then click [Next].
  • Page 27 9)The following wizard will appear. Make sure a [rsblkmpd.inf] file is found, and then click [Next]. 10)The following wizard will appear. Click [Yes]. 11)The following wizard will appear. Click [Finish].
  • Page 28 WDM(withMPD)] string without any “!” marks or “?” marks under the [Universal Serial Bus controllers], the installation has completed successfully. 13)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 29: 2-5-2.Installing A Microsoft Driver On Windows 2000

    “!” marks or “?” marks under the [Universal Serial Bus controllers], the installation has completed successfully. 8)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 30: 2-6.Installing On Windows 98Se

    2-6.Installing on Windows 98SE To install a driver on Windows 98SE, follow the steps through: 1)The following wizard will appear. Insert the bundled CD-ROM, and then, click [Next]. 2)The following wizard will appear. Make sure the [Search for the best driver for your device(Recommended)] option is selected, and then click [Next].
  • Page 31 3)The following wizard will appear. Select the [CD-ROM drives] option, and then click [Next]. 4)The following wizard will appear. Make sure a [RSBULKM.INF] file is found, and then click [Next]. 5)The following wizard will appear. Click [Finish].
  • Page 32 6)The following wizard will appear. Click [Next]. 7)The following wizard will appear. Make sure the [Search for the best driver for your device(Recommended)] option is selected, and then click [Next]. 8)The following wizard will appear. Select the [CD-ROM drives] option, and then click [Next].
  • Page 33 9)The following wizard will appear. Make sure a [RSBUKMPD.INF] file is found, and then click [Next]. 10)The following wizard will appear. Click [Finish].
  • Page 34 MassStorage Device WDM(withMPD)] string without any “!” marks or “?” marks under the [Universal Serial Bus controllers], the installation has completed successfully. 12)If you remove the U2SCXU from a PC, proceed to 2-7. Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

  • Page 35: 2-7.Removing The U2Scxu From A Pc

    2-7.Removing the U2SCXU from a PC In order to remove the U2SCXU, you need to follow the instructions below: 1)Click the removable icon at the task tray located at the lower right corner of the desktop. 2)The following pop-up menu will appear. Select it and then you can remove the U2SCXU from a PC.
  • Page 36 [Windows Me Pop-up menu when the RATOC driver was installed ] [Windows Me Pop-up menu when the Microsoft driver was installed ] [Windows 98SE pop-up menu ]...

  • Page 37: 2-8.Connecting The U2Scxu To A Mac

    2)Turn on the SCSI devices. 3)Connect the U2SCXU to an available USB port, as Fig.4 shows. A LED on the U2SCXU will come on. If the LED doesn’t come on, refer to Chapter 4-10. 4)If you connected a storage device, its icon will mount on the desktop.

  • Page 38: Utility

    You can do the followings with the utility: -You can configure settings for the SCSI device. -You can update the firmware on the U2SCXU. -You can format a HDD, Zip, Jaz, MO, etc.(Windows users only) If you are a Windows user, proceed to Chapter 3-1.

  • Page 39: 3-1.Using Utility On Windows

    1)Remove the U2SCXU from a PC as described in Chapter 2-7. Don’t remove the SCSI device from the U2SCXU. 2)Insert the bundled CD-ROM and double-click [U2SCXUTY.EXE] at the [U2SCX] folder. The following window will appear. 3)You will be prompted to connect the U2SCXU to the PC. Connect it.
  • Page 40 4)The following window will appear. If you configure settings for the SCSI device, select the [Config Utility] button. Proceed to Chapter A.Config Utility for the details. If you update the firmware on the U2SCXU, select the [Firmware update Utility] button. Proceed to Chapter B.Firmware update...

  • Page 41: A.config Utility

    The message saying configuration has completed will appear. Click the [cancel] button to go back to the main menu and click the [EXIT] menu. 3)Remove the U2SCXU from the PC as described in Chapter 2-7 and then restart the PC. After the PC finished starting, reconnect the U2SCXU for...
  • Page 42 Detailed each setting [Host SCSI ID] U2SCXU SCSI ID is No. 7. [TransferSpeed] Default value is 20MB/s.You can set Max transfer rate from 20,10,5MB/s, Async. [Show advanced setting] When you click this button, the advanced setting window will appear. [default]...
  • Page 43 Default value is 0. You can set delay time for some SCSI devices which hang up if SCSI bus reset is issued right after the U2SCXU gets powered. Set this value to 2 sec. for Castle Wood ORB drive, Canon FB620S or Sharp JX-370.

  • Page 44: B.firmware Update Utility

    The latest firmware date file will be available on the web site: (http://www.ratocsystems.com/english) In order to update the firmware on the U2SCXU, follow the steps: 1)The following window will appear after you have clicked the [Firmware update Utility] button. Click the [Write Firm] button.
  • Page 45 6)The message saying you can remove the U2SCXU from the PC and then click [OK]. 7)Click [OK] on the following window. 8)Turn off the SCSI device and restart the PC. After the PC finished starting, reconnect the U2SCXU and turn on the SCSI device for your changes to take effect.

  • Page 46: 3-1-2.Disk Formatting And Partitioning Utility

    3-1-2.Disk formatting and Partitioning Utility You can format a HDD, Jaz, Zip drive, etc.,with this utility. (Caution) You can’t format a CD-R/RW or DVD-RAM/ROM/RW, etc. If you are a Windows Me or 98SE user, proceed to Chapter A. If you are a Windows XP or 2000 user, proceed to Chapter B.

  • Page 47: A.format Utility On Windows Me/98Se

    4)The following window will appear. Select the drive you want to format, and click the [Select] button. (Caution) The drive lists shows all the devices connected to 1394,USB, SCSI port on the PC. Be sure to select the drive connected to the U2SCXU.
  • Page 48 5)The following window will appear. Select [Initialize/Format media] from the [Edit] menu. 6)The following window will appear. Select format type. If you want to do Low Level Format simultaneously, check the [Low Level Format] box. Click [OK].
  • Page 49 [OK]. 8)Remove the U2SCXU from the PC as described in Chapter 2-7 and then turn off the SCSI device and reconnect the U2SCXU and turn on the SCSI device for your changes to take effect. If you are using a removable media, the media will be ejected to take effect.

  • Page 50: B.disk Utility On Windows Xp/2000

    B.Disk Utility on Windows XP/2000 With this utility, you can initialize Master Boot Record or do physical format. You may resolve the following issues with this disk utility: •Fails to access to a SCSI disk •Fails to recognize a SCSI disk even if the SCSI disk was formatted •Fails to format a SCSI disk Please note you don’t need to use this utility when you format a new disk or change partitions.
  • Page 51 (Caution) The drive lists shows all the devices connected to 1394,USB, SCSI port on the PC. Be sure to select the drive connected to the U2SCXU. 5)Select the [Initialize MBR] button or [Physical Format] button. Please note it will take a very long time, sometime, over one hour, to complete physical format.

  • Page 52: 3-2.Using Utility On Mac

    3-2.Using utility on Mac If you are a MacOS 9.x user, proceed to Chapter 3-2-1. If you are a MacOS X user, proceed to Chapter 3-2-2. NOTE But please note you don’t need to use this utility if the SCSI device works fine.

  • Page 53: 3-2-1.Installing Utility On Macos 9.X

    3-2-1.Installing utility on MacOS 9.x You can configure settings for a SCSI device or update the firmware on the U2SCXU with this utility. When you update the firmware, don’t remove the SCSI device from the U2SCXU. You need to keep connecting the U2SCXU to the SCSI device.
  • Page 54 3)The following window will appear. Type a name such as [U2SCX Configuration] and click [OK]. Next, set disable the following drivers located at the [Extensions Manager]. -USB Authoring Support -Authoring Support -Disc Banner Extension 4)Insert the bundled CD-ROM. 5)Double-click [U2SCX-Configuration-E] at the [U2SCX] folder. 6)Follow the on-screen instructions and the following window will appear.
  • Page 55 If you want to configure settings for a SCSI device connected to the U2SCXU, you need to select [Config Utility] from the [File] menu. Proceed to A. If you want to update a firmware date on the U2SCXU, you need to select [Firmware update Utility] from the [File] menu. Proceed to B.

  • Page 56: A.config Utility

    -USB Authoring Support -Authoring Support -Disc Banner Extension 2)Make sure the U2SCXU is removed from a Mac and start the U2SCX Utility at the [U2SCX] folder. The following window will appear. Connect the U2SCXU to the Mac and click [OK].
  • Page 57 3)The following window will appear. Click [OK]. 4)Select [Config Utility] from the [File] menu. The following window will appear. Refer to A in Chapter 3-1-1 for each item. When you click the [Advanced] button, the following window will appear.
  • Page 58 5)After you have done settings, click [Write]. The message saying updating completed will appear. Click [OK]. Select [Quit] from the [File] menu. Remove the U2SCXU from the Mac and turn off the SCSI device attached to the U2SCXU. 6)Change the settings from [U2SCX Configuration] to the previous setting with [Extensions Manager] and restart your Mac.

  • Page 59: B.firmware Update Utility

    -USB Authoring Support -Authoring Support -Disc Banner Extension 2)Make sure the U2SCXU is removed from a Mac and start the U2SCX Utility at the [U2SCX] folder. The following window will appear. Connect the U2SCXU to the Mac and click [OK].
  • Page 60 4)Select [Firmware update Utility] from the [File] menu. The following window will appear. [Firmware Rev] means the current revision of the firmware on the U2SCXU. 5)Select [Select New Firmware Data File] and select a new firmware data file(The extension of a firmware data file is “frm”) and then click [OK].
  • Page 61 6)The window shown at step 4) will appear. Click [Write]. The message saying updating completed will appear. Click [OK]. Select [Quit] from the [File] menu. Remove the U2SCXU from the Mac and turn off the SCSI device attached to the U2SCXU.

  • Page 62: 3-2-2.Using Utility On Macos X

    3-2-2.Using utility on MacOS X You can configure settings for a SCSI device or update the firmware on the U2SCXU with this utility. When you update the firmware, don’t remove the SCSI device from the U2SCXU. You need to keep connecting the U2SCXU to the SCSI device.
  • Page 63 4)Connect the U2SCXU to the Mac. The following window will appear. If you want to configure settings for a SCSI device connected to the U2SCXU, proceed to A. If you want to update a firmware date on the U2SCXU, proceed to B.

  • Page 64: A.config Utility

    1)Click the [Start Configuration setting] button. 2)The following window will appear. Click [OK]. 3)Remove the U2SCXU from the Mac and turn off the SCSI device attached to the U2SCXU. 4)Click the [Quit U2SCX Utility] button. The following window will appear.

  • Page 65: B.firmware Update Utility

    3)Click the [Start Firmware update] button. 4)The following window will appear. Click [OK]. 5)Remove the U2SCXU from the Mac and turn off the SCSI device attached to the U2SCXU. 6)Click the [Quit U2SCX Utility] button. The following window will appear.

  • Page 66: Troubleshooting

    4.Troubleshooting 4-1.General Hardware Troubleshooting n Be sure the U2SCXU’s power LED comes on. If the LED doesn’t come on, your SCSI device may not provide SCSI bus termination power. If the SCSI device can’t provide it, an OPTIONAL AC adapter is required.

  • Page 67: 4-2.Deleting The Ratoc Original Driver(Windows Xp/2000)

    WINNT folder in the C drive. f.Search an oemX.inf(X means a number). Open each oemX.inf file to find the file related to the U2SCXU. If you found a U2SCX string in the file, delete it. You also need delete the file of which extension is PNF and the same file name(oemX).

  • Page 68: 4-3.Deleting The Ratoc Original Driver(Windows Me/98Se)

    Windows Me/98SE is installed in Look in box. h.Click the Find Now(Search Now) button. i.If the file appeared, delete it. In the same way, delete an [RATOC Systems,Inc.RSBLKM.INF] file. Remove the U2SCXU and you have finished deleting the drivers.

  • Page 69: 4-4.Updating The Ratoc Original Driver(Windows Xp)

    1)Delete the old drivers as described in Chapter 4-2. 2)Connect the U2SCXU to an available USB port on your PC. The following window will appear. Select the [Install from a list or specific location(Advanced)] option and click [Next].
  • Page 70 4)Select the folder containing the U2SCXU driver. Click [OK]. 5)The selected location is shown and click [Next]. 6)The following window will appear and click [Continue Anyway].
  • Page 71 7)The following window will appear and click [Finish]. 8)Select the [Install from a list or specific location(Advanced)] option and click [Next]. 9)The same location you have selected at step 4 is shown and click [Next].
  • Page 72 10)The following window will appear and click [Continue Anyway]. 11)The following window will appear and click [Finish]. You have now finished updating the drivers.

  • Page 73: 4-5.Updating The Ratoc Original Driver(Windows Me)

    When you have a new driver through our web site, you can update the driver as follows: 1)Delete the old drivers as described in Chapter 4-3. 2)Connect the U2SCXU to an available USB port on your PC. The following window will appear. Select the [Specify the location of the driver(Advanced)] option and click [Next].
  • Page 74 4)Select the folder containing the U2SCXU driver. Click [OK]. 5)The selected location is shown and click [Next]. 6)Click [Next].
  • Page 75 7)The following window will appear and click [Finish]. 8)The following window will appear. Select the [Specify the location of the driver(Advanced)] option and click [Next]. 9)The same location you have selected at step 3 is shown and click [Next].
  • Page 76 10)Click [Next]. 11)The following window will appear and click [Finish]. You have now finished updating the drivers.

  • Page 77: 4-6.Updating The Ratoc Original Driver(Windows 2000)

    1)Delete the old drivers as described in Chapter 4-2. 2)Connect the U2SCXU to an available USB port on your PC. The following window will appear. Click [Next]. 3)The following window will appear. Select the [Search for a suitable driver...
  • Page 78 4)The following window will appear. Select the [Specify a location] option and click [Next]. 5)The following window will appear. Click [Browse]. 6)Select the folder containing the U2SCXU driver. Click [Open].
  • Page 79 7)The selected location is shown and click [OK]. 8)Click [Next]. 9)The following window will appear and click [Finish].
  • Page 80 10)Click [Next]. 11)The following window will appear. Select the [Search for a suitable driver for my device(Recommended)] option and click [Next]. 12)The following window will appear. Select the [Specify a location] option and click [Next].
  • Page 81 13)The same location you have selected at step 6 is shown and click [OK]. 14)Click [Next]. 15)The following window will appear and click [Yes]. 16)The following window will appear and click [Finish] and then restart your PC. You have now finished updating the drivers.

  • Page 82: 4-7.Updating The Ratoc Original Driver(Windows 98Se)

    1)Delete the old drivers as described in Chapter 4-3. 2)Connect the U2SCXU to an available USB port on your PC. The following window will appear. Click [Next]. 3)The following window will appear. Select the [Search for the best driver...
  • Page 83 4)The following window will appear. Select the [Specify a location] option and click [Next]. 5)Select the folder containing the U2SCXU driver. Click [OK]. 6)The selected location is shown and click [Next].
  • Page 84 7)Click [Next]. 8)The following window will appear and click [Finish]. 9)The following window will appear and click [Next].
  • Page 85 10)The following window will appear. Select the [Search for the best driver for your device(Recommended)] option and click [Next]. 11)The same location you have selected at step 6 is shown and click [OK]. 12)Click [Next].
  • Page 86 13)The following window will appear and click [Finish].
  • Page 87 M2512A, M2513A, the system sometimes locks up. If you use these old FUJITSU MO models, remove the U2SCXU from the SCSI device and attach the U2SCXU to another SCSI device to set transfer rate to 10MB/sec with the SCSI configuration utility. Please note you can’t execute the SCSI configuration utility with the older FUJITSU MO models attached to the U2SCXU.

  • Page 88: 4-9.When A New Drive Letter Isn't Assigned(Windows)

    4-9.When a new drive letter isn’t assigned(Windows) When you connect a HDD which isn’t formatted or doesn’t have partitions, a new drive letter won’t be assigned in [My Computer]. You need to format or create partitions on the HDD. 1.When you use Windows Me/98SE, you can format your HDD and create partitions with the bundled “Format Utility”.

  • Page 89: 4-10.When The Power Led Doesn't Come On(Win/Mac)

    Check the following points: 1)Be sure the SCSI device is powered on properly. 2)Turn off the SCSI device and make sure the U2SCXU is attached firmly, and turn on the device again. If the LED doesn’t come on even if you have done the above checking, refer to the user’s document on the SCSI device.

  • Page 90: 4-11.A Message Saying [Scanning Failed] Appears When You Removed The U2Scxu Removable Icon(Ratoc U2Scx-Usb2 Scsi Converter)(Win/Mac)

    4-11.A message saying [Scanning failed] appears when you removed the U2SCXU removable icon(RATOC U2SCX-USB2 SCSI Converter)(Win/Mac) This problem is caused by the specifications of the U2SCXU. Don’t remove the U2SCXU while a scanner is scanning. 4-12.A message saying [The device “RATOC USB Mass Storage Device WDM (withMPD) cannot be stopped because a program is still running”]...

  • Page 91: 4-13.Wizard Starts Up With A Scanner Connected(Windows)

    4-13.Wizard starts up with a scanner connected(Windows) When you connect the U2SCXU connected to scanner to a PC, wizard will start up because the driver of the scanner is required. In this case, specify the driver provided by its manufacturer.
  • Page 92 [For Windows Me users] 1.A wizard will appear after you have finished installing the driver for the U2SCXU. Select the [Specify the location of the driver(Advanced)] option and click [Next]. 2. Select the [Display a list of all the drivers in a specific location, so you can select the driver you want] option and click [Next].

  • Page 93: Registration And Tech-Support

    -Technical Support- You can get a Tech support from RATOC at the following: (Open Monday - Friday,9:30A.M. to 5:00P.M.(PST)) RATOC Systems International,Inc. Tech support Address: 1933 O’Toole Avenue Suite A109 SanJose, CA 95131, U.S.A. Phone : (408)955-9400 Fax : (408)955-9402 E-mail : int-support@rexpccard.co.jp...

  • Page 94: Options

    -RCL-3005 (HD50F to C50P adapter) -RCL-3025 (HD50F to DB25P adapter) -AC05 (AC Adapter:Input AC100-240V, Output DC 5V, 2A) If you have any questions about these options, contact to: RATOC Systems International, Inc. Tech support: : (408)955-9400 : (408)955-9402 E-mail: int-sales@rexpccard.co.jp...

  • Page 95: Specifications

    7.Specifications Product Name :U2SCXU Transfer :SCSI •Max synchronous transfer 20MBytes/sec (When you connect an Ultra SCSI device) •Max synchronous transfer 10MBytes/sec (When you connect a SCSI-2 device) •Max asynchronous transfer 5MBytes/sec •480/12/1.5Mbps SCSI connector:High-Density 50 pin male SCSI-2 connector x 1 USB connector: USB Type A x 1 Size:2.01 in (51 mm) (W) x 2.05 in (52 mm) (L) x 0.71 in (18 mm) (H)

  • Page 96: A P P E N D I

    (4) Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance may result in this unit not complying with FCC Rules Part 15. Manufacturer declaration This certifies that the U2SCXU complies with the EN55022(Class B) and EN55024 requirements.

Table of Contents