Download  Print this page

Ratoc Systems PCIU2 User Manual

Usb2.0 pci host board
Hide thumbs

Advertisement

USB2.0 PCI Host Board
PCIU2
User's Manual
June 2001
Rev.1.0

Advertisement

Table of Contents
loading

  Related Manuals for Ratoc Systems PCIU2

  Summary of Contents for Ratoc Systems PCIU2

  • Page 1 USB2.0 PCI Host Board PCIU2 User’s Manual June 2001 Rev.1.0...
  • Page 2: Table Of Contents

    1. Introduction... 3 1-1. Features ... 3 1-2. Restrictions ... 3 1-3. Required Operating Systems ... 3 1-4. Other Requirements ... 3 2. Before installing..4 2-1. Package ... 4 2-2. Using Low-Profile Bracket ... 4 3. Setting up ... 5 3-1.
  • Page 3: Introduction

    •Includes our original USB2.0 EHCI driver. Supports Windows 98SE, Windows Me, Windows 2000. •500mA max. per port available. •Includes Low-Profile PCI bracket. You can use this PCIU2 PCI board with a Low-Profile PC. 1-2. Restrictions •You can’t connect a USB2.0 device via a USB2.0 HUB.
  • Page 4: Before Installing

    If any of these items are missing from the PCIU2 retail package, contact your supplier immediately. 2-2. Using Low-Profile Bracket If you use the PCIU2 with a Low-Profile PC, you have to replace the bracket with the bundled Low-Profile bracket as shown below.
  • Page 5: Setting Up

    Turn off your computer and install the PCIU2 into a PCI slot. Please note the following: 1.You have to install the PCIU2 firmly. If the PCIU2 isn’t installed firmly, this product or your PC may get damaged. 2.Be sure the gold contact of the PCI board is completely in a white PCI slot.
  • Page 6: Installing The Driver(Windows 98Se)

    3-2. Installing the driver(Windows 98SE) When you use Windows 98SE, follow the steps to install the driver. When you start your PC after installing the PCIU2, the following Hardware Wizard will appear. Insert the PCIU2 CD-ROM into the CD-ROM drive and click [Next].
  • Page 7 Select [The updated driver(Recommended) NEC USB Open Host Controller] and click [Next]. Click [Next]. Click [Finish]. The same hardware wizard as shown at the step 1 through 6 will appear again. Follow the same procedure.
  • Page 8 Then, the following hardware wizard will appear. Select [Search for the best driver for your device.(Recommended)] and click [Next]. Select [Specify a location] and type in [D:\PCIU2] and click [Next]. (D means your CD-ROM drive letter. If your CD-ROM is “E”, you have to type in...
  • Page 9 Make sure Windows found the PCIEHCI.INF file in the PCIU2 folder in the CD-ROM drive. Then, click [Next]. Click [Finish]. Restart your PC. You have now finished installing the driver.
  • Page 10 To verify that the driver is installed correctly, right-click on [My Computer], select [System Properties], and then select the [Device Manager] tab. If you can find two [NEC USB Open Host Controller] strings and a [RATOC PCI USB Enhanced Host Controller] string under the [Universal Serial Bus Controllers], the driver is installed correctly.
  • Page 11: Installing The Driver(Windows 2000)

    After verifying Service Pack2 or later is installed, follow the steps: When you start your PC after installing the PCIU2, the following Hardware Wizard will appear. Insert the PCIU2 CD-ROM into the CD-ROM drive and click [Next]. Select [Search for a suitable driver for my device(recommended)] and click [Next].
  • Page 12 The following dialog box will appear.Type in [E:\PCIU2] and click [OK]. (E means your CD-ROM drive letter. If your CD-ROM is “D”, you have to type in [D:\PCIU2].) Make sure Windows found the PCIEHCI.INF file in the PCIU2 folder in the CD-ROM drive. Then, click [Next]. Click [Finish].
  • Page 13 To verify that the driver is installed correctly, right-click on [My Computer], select [System Properties], and then select the [Hardware] tab. Then, click the [Device Manager] button. If you can find two [NEC PCI to USB Open Host Controller] strings and a [RATOC PCI USB Enhanced Host Controller] string under the [Universal Serial Bus Controllers], the driver is installed correctly.
  • Page 14: Installing The Driver(Windows Me)

    3-4. Installing the driver(Windows Me) When you use Windows Me, follow the steps to install the driver. When you start your PC after installing the PCIU2, the following Hardware Wizard will appear. Insert the PCIU2 CD-ROM into the CD-ROM drive and select [Automatic search for a better driver(Recommended)] and click [Next].
  • Page 15 Enhanced Host Controller] string under the [Universal Serial Bus Controllers], the driver is installed correctly. NOTE You may find the [RATOC PCI USB Enhanced Host Controller] string with green ? marks. But this doesn’t affect the peformance of this PCIU2 board.
  • Page 16: Registration And Tech-Support

    (http://www.ratocsystems.com/english/) -Technical Support- You can get a Tech support from RATOC at the following. (Open Monday - Friday, 9:30A.M. to 5:00P.M(PST)) RATOC Systems International,Inc. Tech support Address: 1933 O’Toole Avenue Suite A109 SanJose, CA 95131, U.S.A. Phone : (408)955-9400 : (408)955-9402 E-mail : int-support@rexpccard.co.jp...
  • Page 17: Options

    Option is available (sold separately) at the web site: 1. http://www.ratocsystems.com/english/ 2. http://www.firewireshop.com -USB2-01 (USB2.0 cable(3 feet)) If you have any questions about the option, contact to: RATOC Systems Insternational, Inc. Tech Support TEL : (408)955-9400 FAX: (408)955-9402 E-mail: int-support@rexpccard.co.jp...
  • Page 18: Specifications

    E n v i r o n m e n t connector port corrent Optional connector PCIU2 USB2.0 PCI Host Board 32bitPCI Bus Master(PCI Local Bus 2.2 compliant) 480/12/1.5 Mbps(HS/FS auto-detection) Operating temperature0°C/32°F - 55°C/131°F Relative humidity 20% - 80% (noncondensing) USB 2.0 Type A x 2port...
  • Page 19: Appendix

    Appendix Copyright ©2001 RATOC Systems,Inc. All rights reserved. No part of this publication may be reproduced, store in a retrieval system, or transmitted in any form or by any means(electronic, mechanical, photocopying, recording or otherwise) without the prior written consent of RATOC Systems,Inc.