Download  Print this page

Raritan Security Camera Setup And Installation

Raritan computer security camera user manual
Hide thumbs
   

Advertisement

please
Guide
Setup
and
Installation
Series
M
IP-Reach
Raritan Computer Inc.
Raritan Computer Europe, B.V.
400 Cottontail Lane
P.O. Box 566
Somerset, NJ 08873
2900 AN Capelle aan den IJssel
USA
The Netherlands
Tel. 1-732-764-8886
Tel. 31-10-284-4040
Fax. 1-732-764-8887
Fax. 31-10-284-4049
E-mail: sales@raritan.com
E-mail: sales.europe@raritan.com
http://www.raritan.com
http://www.raritan.com
CD-ROM.
enclosed
the
on
found
Manual
User
the
instructions,
operating
and
installation
detailed
more
Quick
Raritan Computer Japan, Inc.
Raritan Computer Taiwan, Inc.
Kuga Building 7F
5F, 121, Lane 235,
11-6, Kuramae 4-chome
Pao-Chiao Rd., Hsin Tien
Taitoo-ku, Tokyo 111-0051, Japan
Taipei Hsien, Taiwan, ROC
Tel. 81-3-5833-6360
Tel. 886-2-8919-1333
Fax. 81-3-5833-6336
Fax. 886-2-8919-1338
E-mail: sales.japan@raritan.com
E-mail: sales.asia@raritan.com
http://www.raritan.co.jp
http://www.raritan.com.tw
consult
I. Prepare Servers and Network for Remote Operation
For
Congratulations on your purchase of IP-Reach, the industry-leading solution for multi-platform, high-performance, remote,
network-based KVM console access. IP-Reach enables highly-secure, multi-user, bandwidth-efficient, and software-independent
access to your servers' KVM consoles via a web browser.
Before installing IP-Reach, first configure each server which you intend to access remotely with the following parameters. This
important installation procedure ensures optimal video / mouse performance and responsiveness.
All Servers
A. For optimal bandwidth efficiency and
video performance, set the desktop back-
ground to a predominantly solid, plain, light-
colored graphic.
B. Ensure that the server's video resolution
and refresh rate are supported by IP-Reach,
and the signal is non-interlaced:
Text Mode
640x480 @ 60Hz
640x480 @ 72Hz
640x480 @ 75Hz
640x480 @ 85Hz
800x600 @ 60Hz
800x600 @ 72Hz
800x600 @ 75Hz
800x600 @ 85Hz
II. Attach Local Console for Initial Configuration
1. Attach the included AC power cord to
IP-Reach, and into an AC power outlet.
2. Attach a PS/2 keyboard and multisync
monitor to the corresponding ports in the
back of IP-Reach marked "Admin Console."
3. Power ON IP-Reach.
4. After booting, IP-Reach will display the
Setup Wizard on the Admin Console screen.
Press 'B' on the Admin Console keyboard to
begin configuring IP-Reach.
5. On the Key Configuration Screen, enter
the 16-digit user license key located on the
software certificate included with your IP-
Reach unit. Press <Ctrl+S> to save.
6. On the Network Configuration Screen,
assign a unique name (e.g. "Server_Room")
and IP Address parameters for IP-Reach.
7. The Main Menu appears. Browse
through the Admin Console options to
configure IP-Reach as appropriate to your
environment. Refer to the User Manual
found on the enclosed CD-ROM for detailed
descriptions of administrative parameters.
8. When satisfied with your IP-Reach con-
figuration, return to the main menu of the
255-80-3102 Rev0A
Network / Firewall
In order to enable IP-Reach, your network
and firewall must allow communication on
TCP Port 5000. Alternatively, IP-Reach can
be configured to use a different TCP port of
your own designation (in step II-6 below).
Windows XP
Disable "Enhanced Pointer Precision", and set
the mouse motion speed exactly to the
1024x768 @ 60Hz
middle speed setting; these options are locat-
1024x768 @ 70Hz
ed in Control Panel > Mouse > Mouse Pointers.
1024x768 @ 75Hz
1024x768 @ 85Hz
Windows 2000 / ME
1152x864 @ 60Hz
Set mouse pointer acceleration to "none",
1152x864 @ 75Hz
and the mouse motion speed exactly to the
1280x1024 @ 60Hz
middle speed setting.
Windows 95 / 98 / NT
Set mouse motion speed to the slowest
setting in Control Panel > Mouse > Motion.
IP-Reach M1 / M2
1
To AC Power Outlet
Admin Console, and press 'R' to "Restart or
shutdown IP-Reach". Press 'S' to shutdown,
and power OFF IP-Reach.
9. At this time, you may detach the PS/2
keyboard and multisync monitor from the
Admin Console ports, or leave them
attached for future monitoring or further
configuration.
ALTERNATIVE: As an alternative method
of performing initial configuration, you may
connect to IP-Reach via a web browser on a
Windows computer, instead of directly via a
keyboard and monitor as described above.
Linux
Set mouse acceleration to exactly 1, and
threshold to exactly 1.
Sun Solaris
Set mouse acceleration to exactly 1.0. Also
be sure that your video card is set to a
supported resolution, and is outputting VGA
(H-and-V Sync, not composite sync). This
non-default configuration can be set in the
bootprom mode by issuing the command
"setenv output-device screen:r1024x768x70",
followed by "boot" to reboot.
Macintosh
While no specific mouse setting is required,
when using IP-Reach to access and control
a Macintosh system, you must set the IP-
Reach client to "single cursor" mode. See
IP-Reach User Manual for more details.
2
Local Admin Console
KEYBOARD AND MONITOR USED TO
PERFORM INITIAL CONFIGURATION
To do so, simply attach a crossover
Ethernet cable between the network ports of
IP-Reach and your computer; enter IP-
Reach's default IP address into Internet
Explorer (192.168.0.192); and login with the
default username / password ("admin" /
"raritan").
After authenticating, you will be directly
connected to your IP-Reach unit. On the left-
hand side of the window, double-click on
the "Admin Console" port to commence
remote administration of your IP-Reach unit.

Advertisement

Table of Contents
loading

  Related Manuals for Raritan Security Camera

No related manuals

  Summary of Contents for Raritan Security Camera

  • Page 1 Guide Setup Installation Quick Series IP-Reach Raritan Computer Inc. Raritan Computer Europe, B.V. Raritan Computer Japan, Inc. 400 Cottontail Lane P.O. Box 566 Kuga Building 7F Somerset, NJ 08873 2900 AN Capelle aan den IJssel 11-6, Kuramae 4-chome The Netherlands Taitoo-ku, Tokyo 111-0051, Japan Tel.
  • Page 2 III. Connect to Network; Attach Servers to be Remotely Accessed In this step, connect IP-Reach to the network; and attach the server(s) or KVM switch(es) which you wish to access remotely. Local User Console [Optional] “KVM OUT” PORT(S) ALLOW DIRECT ANALOG To AC ACCESS TO SERVER OR KVM SWITCH ATTACHED Power Outlet...