Smartinfo; Smartinfo Show; Smartinfo Browser - Philips HFL3011 Series Installation Manual

For easysuite range
Table of Contents

Advertisement

8 SmartInfo

The SmartInfo feature can be used in two ways, as a picture slide show [Show] or as interactive
pages [Browser]. The two ways of using SmartInfo are not complementary and cannot be used both
at the same time. SmartInfo can display the pictures or the webpages by pressing "SmartInfo".

8.1 SmartInfo Show

SmartInfo used as Show contains pictures uploaded in TV memory which are changed by the TV set
automatically every 8 seconds. The pictures are displayed in a loop and the guest cannot influence
the speed or the order of displaying.
How to upload pictures for SmartInfo Show:
Create JPEG graphics files with a maximum resolution of 1920 x 1080 pixels. Pictures with
lower resolution will be upscaled to 1920x1080 pixels
File name should be: file_01.jpg
For multiple picture files the names should be consecutive. Example for 4 pictures in
SmartInfo
o file_01.jpg
o file_02.jpg
o file_03.jpg
o file_04.jpg
Save the files into to following folder on your USB device:
TPN161HE_CloneData\MasterCloneData\SmartInfoShow\
The folder "TPN161HE_CloneData" should be in the root of the USB flash drive
Switch ON the TV, insert the USB with the new content
Go to [Professional settings] [Upgrade and Clone settings] [USB Based Upgrade] [Clone USB
to TV] menu and press "OK" to upload the pictures in the TV
Once done, exit [Professional settings] and reboot the TV and check you changes

8.2 SmartInfo Browser

SmartInfo used as Browser will display the content you created with CMND. This content can be
stored on the TV locally or on a dedicated server.
How to upload content for SmartInfo Browser:
Create the content with CMND
Save the files into to following folder:
TPN161HE_CloneData\MasterCloneData\SmartInfoBrowser\
The folder "TPN161HE_CloneData" should be in the root of the USB flash drive
Switch ON the TV, insert the USB with the new content
Go to [Professional settings] [Upgrade and Clone settings] [USB Based Upgrade] [Clone
USB to TV] menu and press "OK" to upload the pictures in the TV
Once done, exit [Professional settings] and reboot the TV and check you changes
69 |
P a g e

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents