Signal Testing; Analogue; Digital - Philips HFL3011 Series Installation Manual

7.4 Signal Testing

Before installing channels or possibly for checking something it might be needed to check for a signal
without the need for completely reinstalling all channels. With the below menu's you have the ability
to do so.
Also upgrading the channel package can be done using this mechanism so that the TV doesn't require
a complete channel search.

7.4.1 Analogue

It's possible to search for channels without installing them. When opening [Analogue: Manual
Installation] you can look for channels manually.
By choosing the [System], entering the frequency in [Search Channel] and fine tuning the channel in
[Fine Tune] you can check if an analogue channel can be received by the TV.
If you searched for a signal that you wish to add to a possible existing channel list you can choose
between [Store Current Channel] and [Store as new channel] where the definitions already say
where the channel will be stored.

7.4.2 Digital

[Digital Reception Test] will give you the same tools as the analogue wizard but adapted towards
digital signals.
After choosing the [Broadcast Type] you will be able to [Search] for a frequency. Once found the
channel can also be stored if needed.
64 | P a g e